Grundig GR1000 Quick Start Manual

quick start guide

Grundig GR1000
DVD/Video combination
Please follow the instructions below and overleaf to
connect and play video cassettes and DVDs and CDs in
your DVD/VCR
1
Insert batteries into the remote
control
Use two AA/MN1500/LR06 size batteries.
2
Connecting with a RF and SCART lead
Connect your DVD/VCR to a TV using an RF (Coaxial) and SCART lead.
All connections must be made with the power disconnected.
1 (not supplied)
. Connect an external aerial
(marked IN) on the back of your DVD/VCR.
2. Connect one end of a RF lead to the aerial socket on your
TV (marked IN) and the other end to the aerial socket
(marked OUT) on the back of your DVD/VCR.
3. Connect one end of a SCART lead to the SCART socket
on your TV and the other end to the SCART socket
(marked TV RGB Composite) on the back of your
DVD/VCR.
3
Connecting a satellite decoder
All connections must be made with the power disconnected.
(not supplied)
1. Connect an external aerial
on the back of your satellite decoder.
2
. Connect one end of a SCART lead to the SCART socket
on your satellite decoder (marked VCR SCART) and the
other end to the SCART socket (marked TV/RGB
Composite) on the back of your DVD/VCR.
3. Connect one end of a SCART lead to the SCART socket
on your TV and the other end to the second SCART socket
on your Satellite Decoder (marked TV SCART)
4. Connect one end of a RF lead to the aerial socket on your
satellite decoder and the other end to aerial socket
(marked IN) on the back of your DVD/VCR.
5. Connect one end of a RF lead to the aerial socket on your
TV (marked IN) and the other end to the aerial socket
(marked OUT) on the back of your DVD/VCR.
to the aerial socket
to the aerial socket
DVD/VCR
TV
External aerial
DVD/VCR
2 3
2
External aerial
TV
3
4
5
1
1
Satellite
decoder