Table of Contents
Advertisement
using the dAC30
This page explains how to operate your DAC30, using the functions available from
the front panel or C23 remote control.
f r o n t p A n e l
C o n t r o l s
Standby O
Switches the DAC30 to standby, or switches it on
from standby.
Selector
Steps between the inputs.
s e l e C t i n g A s o u r C e
The DAC30 provides a choice of five inputs, IN1
to IN5.
To select a source
•
Press the SELECTOR button until the source
is indicated on the front panel display.
•
Alternatively, press the A or V buttons on
the remote control to step between sources,
or press one of the buttons 1 to 5 on the
remote control to select the corresponding
source directly.
The DAC30 provides an audiophile relay-
controlled mute circuit to avoid clicks when
changing source.
B l A n k i n g t h e
i n d i C A t o r s
To blank the front panel indicators
•
Press the DIM button on the remote control.
•
Press the DIM button again to restore the
indicators.
d A C 3 0 u s e r g u i d e
4
Advertisement
Table of Contents
