Connecting To A Camcorder - JVC I' Art Pro AV-27S776 User Manual

Quick Setup

Connecting to a Camcorder

You may connect a camcorder, game console or other equipment to your television by using
the input jacks (Input 4) located on the side or front of the television. You can also connect
these using the television's rear input jacks, using the same instructions.
Illustration of AV-30W776
1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on
the side of the TV, OR connect an S-Video cable from the side of the TV to the camcorder.
2) Connect a white cable from the camcorder LEFT AUDIO OUT, into the LEFT AUDIO IN on
the side of the TV.
3) Connect a red cable from the camcorder RIGHT AUDIO OUT, into the RIGHT AUDIO IN on
the side of the TV.
Note:
• If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the
L/MONO on the side of the TV. (AV-30W776 ONLY). For all the other models, please use
the input jacks on the front control panel.
Connecting to an amplifier using your optical output
You can connect an amplifier that has an optical digital input terminal by using an optical digital
cable from the optical output. The signal that is output can be PCM or Dolby Digital.
OPTICAL OUT
1) Connect the optical cable from the back of the TV to the back of the amplifier.
Notes:
• This terminal can only output digital audio.
• In order to use the optical output connection, select PCM or Dolby Digital on Digital Sound in
the Digital Setup Menu. See page 63.
• Refer to your owners manual on using your amplifier.
16
Camcorder
Digital Audio
- OR -
TV Rear Panel
Connections
INPUT 4
S-VIDEO
MENU
+
OVER
OPERATE
CHANNEL
–
VIDEO
+
L/MONO
VOLUME
AUDIO
–
R
Amplifier