How to charge V’bee: Use the attached Micro USB cable to charge V’bee by connecting it to a PC or Notebook’ s USB port. V’bee can also be charged by an external AC charger. You can use your iPhone’ s AC charger from Apple or any other AC power adapter which is included in delivery in most current Smartphones and tablets.
Page 3
There are 2 USB Output channels you can use for charging your mobile devices. The left channel outputs 2100mA max to support Apple’ s iPad and other 5V tablet computers (not suitable for 12V or 19V tablets). The right channel outputs 1000mA and can be used for charging all kind of 5V USB devices like Smartphones, GPS devices, digital cameras etc.
LED 1,2 and 3 on: 100%, fully charged and ready to use Declaration of Conformity ZNEX Deutschland GmbH & Co. KG declares responsability that the product V’bee conforms to the following Council Directive: EMV 2004/108/EC Conformity with the requirements of this Directives is testified by complete adherence to...
Important notes Please recharge your V’bee immediately when the last LED is flashing, indicating very low power level. V’bee can charge all kind of 5V USB devices. Please note that it is not suitable for devices with higher Voltage (e.g. 12V tablet computers). V’bee can not charge for example ASUS tablet transformer series, because they require 15V.
Page 6
Lithium ion chemistry prefers partial discharge, no deep discharge; so it’s best to avoid taking V’bee all the way down to zero. Since lithium-ion chemistry does not have a memory, you do not harm the battery pack with a partial discharge. If the voltage of a Li-Ion cell drops below a certain level, it’...
Page 8
All rights reserved No part of this manual may be reproduced, in any form or by any means, without permission in writing from ZNEX Deutschland GmbH & Co. KG. ZNEX Deutschland GmbH & Co. KG | Münchhofstr. 12 | 79106 Freiburg...