BounceKing Trampoline Airzone Combo Instruction Manual page 19

STEP 3
Lay the Enclosure Netting (#L) in the middle of the trampoline as shown. Please make sure the sleeve is
facing up and the Zipper Door should be located between two leg bases of the trampoline. Insert the Upper
Frame Tube with Long Foam (#A) into the one of the sleeve of Enclosure Netting (#L) as shown below.
Please make sure to insert into the bottom piece of the TWO section sleeve.
Do this for all of the Upper Frame Tube with Long Foam (#A) and sleeves.
#L
#B
#A
FIGURE 13
STEP 4
Attach Upper Frame Tube with Long Foam (#A) to the Lower Frame Tube with short Foam (#B) as shown to
make one "POLE".
Do this for all of the tubes.
#A
#B
FIGURE 14
17