To obtain warranty service, call Laser Link Golf at (866) 909-4653 to obtain
Return Authorization. Ship the product, or part thereof, together with
proof of purchase and a note explaining the problem to:
Laser Link Golf
Attn: Repair Department
4027 Owl Creek Drive
Madison, WI 53718
On the accompanying note, and any other correspondence, be sure to
include the model number, the Return Authorization number, your name,
your phone number or email address, and your return address.
THERE ARE NO OTHER EXPRESS WARRANTIES OTHER THAN THOSE STATED HEREIN. THIS
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS
WHICH VARY FROM STATE TO STATE. ANY IMPLIED WARRANTIES, INCLUDING WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN
DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. LASER LINK GOLF SHALL NOT BE
RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT
MODEL 9909
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR
Instruction Manual and
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR
EXCLUSION MAY NOT APPLY TO YOU. LASER LINK GOLF NEITHER ASSUMES NOR AUTHORIZES
Warranty Information
ANYONE TO ASSUME FOR IT ANY OTHER EXPRESS WARRANTY.
THIS WARRANTY DOES NOT APPLY TO ANY ACCESSORIES NOR TO ANY PRODUCT SUBJECTED
TO MISUSE, NEGLIGENT OR ACCIDENTAL DAMAGE, IMPROPER SERVICE OR HANDLING, NOR TO
ANY PRODUCTS ALTERED OR REPAIRED BY ANY PERSON OR COMPANY OTHER THAN LASER
LINK GOLF.
The Red Hot is sealed at the factory and cannot be opened. Any attempt to open the case will
damage the unit and this damage will void the Limited Warranty.
Phone: (608) 838-3100 • Toll Free: 866-909-4653
www.laserlinkgolf.com
Need help?
Do you have a question about the Red Hot 9909 and is the answer not in the manual?
Questions and answers
My RedHot has begun showing horizontal blinking lines,along with an image that resembles the stop/pause button on a tv remote.[already installed a new battery]… is there a way to re-boot or re-program?
To reboot or reprogram the Laser Link Red Hot 9909, follow these steps:
1. Ensure the rangefinder is in the OFF position.
2. Hold the rangefinder with the LCD screen facing you.
3. Press and hold the "On" button until the unit emits three fast beeps (approximately 60 seconds).
4. Release the black button after the third beep.
5. You can now cycle through the measurement settings by pressing and releasing the black button until you reach the desired setting.
This process may help resolve issues like horizontal blinking lines and the stop/pause button image.
This answer is automatically generated