Important Notes; Repairs And Data - Quasimidi Sirius Operating Instructions Manual

In addition to the "IMPORTANT SAFETY INSTRUCTIONS" on the previous
page please note the following:
Connecting to the Mains:
- Do not connect the unit to a socket which is already feeding other units that can cause interference (for
instance electric motors, light controls, fridges etc.)
- The heat generated by the mains adapter is completely normal.
- Whenever you intend to connect the Sirius to other units, first turn off all units. This will prevent possible
malfunctions and damage to speakers and other equipment.
Installation:
- Using the unit close to heavy power sources (or other units containing larger mains transformers) can
cause "humming" or other electrical interference.
- The unit might cause disturbances to television and radio. Do not set up your unit near any of these re-
ceivers.
- Do not expose the unit to extreme temperatures (like for instance direct sun light in a closed vehicle or
extreme frost in winter). The unit could be damaged or the varnish on the casing might disintegrate.
Maintenance:
- To clean the unit wipe it with a soft, dry or damp cloth. To remove persistent stains you can use a damp
cloth and a neutral cleaning agent. Wipe the unit dry afterwards.
- Never use Petrol, Thinner, Alcohol or similar cleaning agents to clean your unit. These can dissolve the
markings and varnish and might deface the casing.

Repairs and Data:

- Please remember that you might lose the memory of your unit when you send it in for repair. Important
information should therefore be stored on a different MIDI-unit (for instance Sequencer). Although ev-
ery care is taken when repairing your unit it can happen, especially when work to the storage/memory
or affiliated groups is necessary, that information is lost. Please note that it is not possible for us to restore
lost data.
5

Important Notes

See page 110