Cord sub-eight Owner's Manual

Sub-eight, high performance subwoofer

Advertisement

sub-eight
owners' manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the sub-eight and is the answer not in the manual?

Questions and answers

Summary of Contents for Cord sub-eight

  • Page 1 manual...
  • Page 2: Introduction

    Introduction Thank you for purchasing a CORD sub-eight, high performance subwoofer. The sub-eight is just one product in our range embracing our philosophy of “extraordinary audio visual gear”. This product has been designed and engineered to give you many years of trouble free listening enjoyment.
  • Page 3: Table Of Contents

    Contents • Introduction • Important safety messages • What’s in the box • Preparing for use • Set up • Basic operation • Troubleshooting • Specifications • Warranty “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
  • Page 4: Important Safety Messages

    • Only use the power supply cord, or equivalent, supplied with this product. Please consult a qualified electrician if the plug does not fit your power outlet. • To ensure your safety, protect the power supply cord from being walked on, cut, pinched, twisted or otherwise compromised.
  • Page 5: What's In The Box

    • One AC power supply cord Preparing for use • To ensure you enjoy maximum benefit from your CORD product, please take a few moments to prepare your product for use. • Carefully select the position of the subwoofer so that connecting cables can easily reach the other devices.
  • Page 6: Set Up

    Set up • Do not switch on your CORD subwoofer until all connections are made. • Connect the subwoofer out on your CORD mi-fi, source amplifier or receiver to the SUB IN DIRECT  on the subwoofer using a single RCA. • If your source amplifier does not have a dedicated subwoofer out, connect the line out to the Line IN ...
  • Page 7 � � � � CROSSOVER LEVEL PHASE OPERATION SUB IN 80Hz 100Hz DIRECT 180º Blue-On � � Auto Line IN 0º Red-On 40Hz 180Hz � Line OUT � From AMP sub-eight � To Speakers � � Fuse ~240V AC 50Hz T500mAL...
  • Page 8: Troubleshooting

    Troubleshooting If you experience any difficulties with the operation of your CORD subwoofer, please check the table below before contacting a service centre. Problem Possible cause Remedy No Power - no indicator light • AC Power cord is out • Connect the AC Power cord • AC socket switch is OFF...
  • Page 9: Specifications

    • Power requirement 240V 50Hz AC • Size 295mm (H) x 250mm (W) x 320mm (D) • Weight 9.7Kg no packaging * At CORD we strive for constant product improvement and as a result product design, specifications and functionality are subject to change without notice.
  • Page 10: Warranty

    In the unlikely event that you should have trouble with your CORD product we are pleased to offer this warranty. It is important that you read the contents of this warranty and be familiar with your rights and obligations.
  • Page 11 What Is Not Covered 1. The cost of delivery and insurance in transit to the service centre. It is your sole responsibility to arrange for your product to be forwarded to your nearest CORD Service Centre for repair or replacement. 2. Time taken to investigate your warranty claim where the product is found to be in good working order. This includes where you have not followed instructions contained in any manuals provided with the product or where the fault is caused by use with incompatible equipment and or software.

Table of Contents