GENERAL
This product is designed to help disinfect the inter-
nal surfaces of heating, ventilation, and air condi-
tioning systems. Bacteria and viruses that are in
the air stream that passes through the system will
also be reduced. The result is an improved level of
indoor air quality for occupants and improved sys-
tem hygiene.
The UV100/UV200 emits ultraviolet (UV-C) radiation
at a frequency of 254 nanometers, which has been
proven effective in arresting microorganisms such
as viruses, bacteria, yeast and molds. This process
either destroys the micro-organism or neutralizes its
ability to reproduce.
Model UV100
Model UV200
UV100 and UV200
Ultraviolet Light Systems
Installation & Operation Manual
Features
• Reduces or prevents mold growth on HVAC
coils, allowing them to operate at peak effi-
ciency. Also greatly reduces bacteria, virus-
es, fungi, and yeasts.
• High output, long life UV-C lamps.
• Low maintenance and reduced costs.
• Multi-voltage electronic ballast.
Included Inside Box
• Germicidal ultraviolet light system
• UV lamp(s)
• Power cord
• Sheet metal screws (5)
• Installation & operation manual
• UV warning label for duct
Tools Required For Installation
• Electric drill
• Phillips screw bit or screwdriver
• 1.5" drill bit or holecutter
• Eye protection
Before Installing
• Read all instructions carefully. Failure to do
so could damage the equipment or cause
harm to yourself or others.
• Read all caution and warning labels.
• Only qualified technicians should perform
the installation.
Part No. 37-6462A
Printed In U.S.A.