Parts Identification; Remote Control - JVC GD-V4200PCE Instructions Manual

Parts Identification

Remote Control

1 Remote signal transmission window
2 DISPLAY button (page 12)
Use this button to display the input terminal, color system
(for VIDEO A or B input), scan system (for COMPONENT
input) and horizontal/vertical frequency (for RGB input).
Pressing the button again will make the display disappear.
3 VIDEO A, VIDEO B, COMPO. and RGB buttons
(page 12)
Use these buttons to switch between inputs.
• Only for GD-V4200PCE and GD-V4200PCE-G: Only
RGB input can be reproduced. Though you can switch to
the other inputs, the images will not reproduced. To
reproduce images through the other inputs, you need to
install video interface kit (IF-C420P1W), which is
separately purchased.
4 MUTING button (page 12)
Use this button to turn off the volume immediately.
Pressing the button again will resume the previous
volume level.
5 MULTIPLE MONITOR ADJUSTMENT buttons (page 24)
Use these buttons to set IDs, etc. when serial connection is
made.
4
1
DISPLAY ASPECT
2
VIDEO A VIDEO B COMPO.
3
MUTING VOLUME
4
MULTIPLE MONITOR ADJUSTMENT
5 ID
MODE ID SET
MENU/EXIT
6
RM-C575 REMOTE CONTROL UNIT
6 MENU/EXIT button
Use this button to display or erase menus.
While a sub-menu is displayed, pressing this button will
move you one screen back to the preceding menu.
7 Remote control cable jack (page 24)
Connect the remote control cable when using this remote
control as a wired remote control.
8 ASPECT button (page 13)
Use this button to switch between aspect ratios. Each time
you press the button, the aspect ratio changes as follows:
9 POWER button (page 12)
Use this button to turn on/off the power.
p VOLUME + / – buttons (page 12)
Use these buttons to adjust the volume level.
• Only for GD-V4200PCE and GD-V4200PCE-G: Though
q 2 / 3 / 5 / ∞ buttons
Use these buttons to select menu items or make
adjustments.
7
8
POWER
9
RGB
p
q
REGULAR
PANORAMIC
you can use these buttons, sound will not be reproduced.
To reproduce the sound, you need to install video
interface kit (IF-C420P1W), which is separately purchased.
FULL
ZOOM