Download Print this page

vPed VST-VSTi User Manual

Virtual pedal board

Advertisement

Quick Links

Thank you for purchasing vPed. We trust that the device can fully satisfy you, offering more and more satisfaction over time. Please
read this guide about the main features and functionality in order to fully take advantage of its potential.
vPed has been developed with the objective of using plug-ins in VST and VSTi formats (owned by "Steinberg Media Technologies
GmbH" ©) in live performances. Plug-in in this format are characterized by an awesome range of effects and virtual instruments
available, usually used only on DAW systems.
vPed already includes pre-installed VST/VSTi plugins, but the goal is to allow the user to make use of the wide availability of VST
plugins downloaded from the web (free or purchased). A vPed user can have fun creating numerous sound situations, easily recalled
during live performance. For this reason, using vPed, you don't have to do anything but think about your music.
vPed retains a large dynamic range, and has a latency of only 3-4 mS, unrecognized by most users. Note that the latency could also
be increased by some plug-ins.
vPed allows you to load and assign 4 + 4 footswitches, for a total of 8 VST and / or VSTi plugins. Note that you can choose how all
effects are activated: in the additive mode all the plug-ins are active at the same time; in the exclusive mode , when one effect is
enabled,the previous is automatically turned off. This mode is useful in the VST that includes both effects and guitar amplifier, and
thus provides a complete set of sounds and effects in the same plug-in.
The first 4 foot switches from the left, are characterized by a blue color, allowing you to simply activate or deactivate an effect.
However, the foot switches can also take editing functions depending on the displayed screen. In management operations or deep
editings, a mouse(included)can be helpful though not essential. It's also possible to connect a computer keyboard (not included), not
essential but useful for procedures of certain plugin installations, or for entries registering a purchased product.
vPed can be attractive for guitar/bass and keyboard players as well as singers, and in any case for those who need to use plugins in
VST / VSTi formats in live performances:
Guitar/Bass players operation modes:
As an 8 effects pedal board, connecting audio output to your amplifier.
As a standalone unit to be connected to a P.A. line input (mono or stereo), using VST plug-ins and Sfx including simulator amp
+ cab at the end of the effects chain
Keyboard players operation modes:
As a VST host for live operation, with the ability to upload up to 8 VSTi /VST Sfx controllable by a connected MIDI keyboard
(not included).
Singers operation modes:
As a VST host for live utilization, by loading for example preamps specifically for vocals, and effect chain to your liking
(compressors, reverbs, delays, pitch correctors etc.).
By
Features and user manual
Introduction
(e.g. TH2© / KUASSA © / Audiffex FreeAmp © / Plektron © etc.).
rel.1
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the VST-VSTi and is the answer not in the manual?

Questions and answers

Summary of Contents for vPed VST-VSTi

  • Page 1 4 + 4 footswitches, for a total of 8 VST and / or VSTi plugins. Note that you can choose how all effects are activated: in the additive mode all the plug-ins are active at the same time; in the exclusive mode , when one effect is enabled,the previous is automatically turned off.
  • Page 2 Connect audio cables (not supplied) to the audio signal outputs, balanced XLR or Jack ¼ "unbalanced, located in the right panel of vPed, at the input/s of the audio system or amplifier. It is strongly recommended to keep the levels of the audio system or the volume of the amplifier, fully lowered before turning on or off vPed using the button located in the left panel.
  • Page 3 Right side panel. Audio connections and footswitches inputs On the right side of vPed there are several audio connectors. In/Out and control connectors description is shown on the front panel to ease use. 1) Guitar / Bass input sensitivity selector. "HI" is preferred for connecting instruments with passive “single coil” pickup and "LOW"...
  • Page 4 Note: Board settings are recorded even when the power is turned off, as long as another board is loaded. In this case, remember to decide whether to save the board or not. vPed, however, when loading another board, the system will ask you whether to save the loaded one or not.
  • Page 5 In this vPed software release the panel proposes the following parameters:  " Aux input volume” to adjust the level of the audio source connected to the mini jack connector available in the vPed’s left panel  “Headphones volume” of course, to adjust phones output level ...
  • Page 6 “SOFTWARE UPGRADE” To update vPed software version. When in possession of an update (files with ". Upg" extension ), copy it to an USB device than connect it to one of the 4 USB ports available on the left side of vPed. Then select the update that will be displayed (e.g.
  • Page 7 "setup" and follow the on-screen instructions provided by the program, which may vary according to the installation program that you are using. If it should be necessary to connect a network, use the Ethernet port available on the left side of vPed. At the end of the installation procedure, follow steps similar to the installation of dll.
  • Page 8: Virtual Led

    The plugin is now available in the selected slot within the board. Above the name of the program is a detail that informs the user about the request for resources by the plugin. If the VIRTUAL LED were to become red, it is possible that the request of resources is greater than that available with the possibility of running into problems in the audio.
  • Page 9 PEDAL1/2/3/4 To assign an expression controller corresponding to one of the 4 jacks ¼ stereo inputs available on the right side of vPed. The expression pedal can be assigned to any parameter proposed by the plugin that you are editing, such as e.g. the gain parameter of an amp simulator, or a filter to open or close during a live performances.
  • Page 10 With the pedal connected, move the box minimum ("Min") and put the pedal to the position of minimum value. Do the same for the maximum value ("Max"). In this way vPed properly adjusts the values of any expression pedal. Notes on editing the plugins parameters:...
  • Page 11  Compatibility of plugins that may be installed in vPed is extremely high, so it will be possible to use most of the VST / VSTi currently available, provided that they are appropriate to the type of device used.
  • Page 12 In case of large items (e.g. sound libraries), however, you can connect, and then "read" by the plugin installed into vPed, data from a connected USB device. Of course you will need to set the plugin where acquire the data.
  • Page 13 Reverberation – VST (Reverb with analog and tube emulation) Overloud <www.overloud.com> TH2 Lite – VST (Guitar amplifier + sfx) – Special lite full working version specifically for vPed Tikov <www.tikov.com/softrave/softrave.htm> Vintage Vibe – VST (Vibrato and Chorus sfx combination, to create famous Jimi Hendrix type vibe effect) Vintage Analog Filter –...
  • Page 14 All trademarks are registered Virtones reserves the right to change the products specifications and/or design at any time without notice. The information contained in this manual is based on vPed software version 1.0. This Information is accurate and reliable, however, the company assumes no responsibility for any inaccuracies.