Haier HMS1000TVE Service Manual page 20

Error message. Motor overheat protection or damaged.
Troubleshooting:
Cut off power and check if motor wires
are connected well
Y
Measure if resistance of motor winding by
multimeter, is it as followed? 1-2:5;
3-5:5; 7-8:5
Y
Pull out the wire connection of motor
Then check if circuit is open by multimeter
Front Load Washing
1
2
3
5
7
Repair wires
Y
Page 19
Machine
Reconnect well
N
Put the motor in normal temperature about
ten minutes, and then test again. If the
N
resistance is natural, it is caused by
overheated protection. Then check and
8
deal with overload, abnormal voltage. If
not, please replace motor
Model:HMS1000TVE