1. Manuals
  2. Brands
  3. Elsner Manuals
  4. Touch Panel
  5. KNX Touch One
  6. Installation and operation manual

Elsner KNX Touch One Installation And Operation Manual

Touchpanel for room automation
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
EN
KNX Touch One
Touchpanel for Room Automation
Item numbers 70195 (white), 70196 (black)
Installation and Operation

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KNX Touch One and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Elsner KNX Touch One

Summary of Contents for Elsner KNX Touch One

  • Page 1 KNX Touch One Touchpanel for Room Automation Item numbers 70195 (white), 70196 (black) Installation and Operation...

  • Page 2: Table Of Contents

    4.2.2. Weather data display ................... 44 4.2.3. Universal Menu ....................47 Elsner Elektronik GmbH • Herdweg 7 • D-75391 Gechingen • Germany Room Controller KNX Touch One • from software version 2.0, ETS program version 1.1 Status: 29.04.2014 • Subject to technical changes. Errors excepted.
  • Page 3 Internal area ......................77 5.3. Light applications ................77 Elsner Elektronik GmbH • Herdweg 7 • D-75391 Gechingen • Germany Room Controller KNX Touch One • from software version 2.0, ETS program version 1.1 Status: 29.04.2014 • Subject to technical changes. Errors excepted.
  • Page 4 6.1. Units for sun and wind ..............136 6.2. Settings data .................. 136 Elsner Elektronik GmbH • Herdweg 7 • D-75391 Gechingen • Germany Room Controller KNX Touch One • from software version 2.0, ETS program version 1.1 Status: 29.04.2014 • Subject to technical changes. Errors excepted.
  • Page 5 Explanantion of symbols Explanation of the symbols used in this manual Danger of death by electrocution! Advice on dangers concerning work on electrical terminals, components etc. Safety measures to protect the life and health of relevant personnel. Safety instruction! Instructions that must strictly be observed to ensure the safe operation. Safety measures to protect against damage to persons or property.

  • Page 6: Description

    Description 1. Description Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 7: Field Of Application

    Integrated interior sensors (temperature, air humidity) and 4 binary inputs (e.g. for buttons) • Data sheet Accessories (not included in the scope of delivery): • Radio remote control Remo 8 Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 8: Technical Data

    * Concerning the display of the temperature for the TH Sensor, please note the next chapter  Automatic intrinsic heat balancing by TH sensor, Seite 8 Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 9: Automatic Intrinsic Heat Balancing By Th Sensor

    • Wind speed • Precipitation • Outdoor temperature This data can be provided by Suntracer KNX, Suntracer KNX-GPS, or Suntracer KNX- GPS light weather sensors. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 10: An Overview Of The Automatic Functions

    • Wind alarm: Retract when a selectable wind speed is exceeded (can be switched off) • Rain alarm: Retract during rainfall (can be switched off) Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 11 Open at a selectable interior temperature (TH sensor/CO2 can be switched off) • Open at a selectable air humidity in the room (TH sensor/CO2 can be switched off) Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 12: Overview Of Functions

    Frost/heat protection (reference value and activation delay can be set) 1.3.2. Overview of functions 1.3.2.1. Only using ETS settable functions • All parameters under General Settings • TH sensor transmission behaviour Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 13: Only Using Display Settable Functions

    Change names for functions, pages and scenes. Temperature and humidity offset (correction to TH sensors). 1.4. List of communication objects DTP: Data Point Type Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 14 K S Ü U External temperature measure- Input 9.001 K S Ü U ment value Wind force measurement value Input 9.005 K S Ü U Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 15 Universal menu page 1 Function 2 Input / Output 14.* C R W T (Display / Input) Universal menu page 1 Function 2 Output C R T (Brief Input) Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 16 Universal menu page 2 Function 5 Input / Output 14.* C R W T (Display / Input) Universal menu page 2 Function 5 Output C R T (Brief Input) Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 17 Universal menu page 3 Function 8 Input / Output 14.* C R W T (Display / Input) Universal menu page 3 Function 8 Output C R T (Brief Input) Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 18 Universal menu page 5 Function 3 Input / Output 14.* C R W T (Display / Input) Universal menu page 5 Function 3 Output C R T (Brief Input) Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 19 Universal menu page 6 Function 6 Input / Output 14.* C R W T (Display / Input) Universal menu page 6 Function 6 Output C R T (Brief Input) Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 20 Universal menu page 8 Function 1 Input / Output 14.* C R W T (Display / Input) Universal menu page 8 Function 1 Output C R T (Brief Input) Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 21 5.001 C R W T Switch Light 5 on/off Input / Output 1.001 C R W T Dim Light 5 Output 3.007 C R T Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 22 C R T Shutter 6 Travel position Input / Output 5.001 C R W T Shutter 6 Slat position Input / Output 5.001 C R W T Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 23 Output 1.009 C R T Window 2 Brief Output 1.010 C R T Window 2 Travel position Input / Output 5.001 C R W T Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 24 1.002 C R T Status – Heating 2 (1=ON | 0=OFF) Temp. controller: Output 1.002 C R T Status – Cooling 1 (1=ON | 0=OFF) Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 25 C R T Button 1 Brief Output 1.010 C R T Switch button 1 on / off Input / Output 1.001 C R W T Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 26 Input 5 Actuating variable comparator 1: Output 5.001 KLÜ Output Actuating variable comparator 1: Input 1.002 Block Actuating variable comparator 2: Input 5.001 Input 1 Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 27 5.001 KLÜ Output Actuating variable comparator 4: Input 1.002 Block Logic input 1 Input 1.002 Logic input 2 Input 1.002 Logic input 3 Input 1.002 Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 28 ODER Logic 1: 8 Bit Output B Output 5.010 KLÜ ODER Logic 1: Blocking Input 1.002 ODER Logic 2: 1 Bit Switching out- Output 1.002 KLÜ Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 29 ODER Logic 4: 8 Bit Output A Output 5.010 KLÜ ODER Logic 4: 8 Bit Output B Output 5.010 KLÜ ODER Logic 4: Blocking Input 1.002 Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 30: Installation

    Installation 2. Installation Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 31: Installation

    Warming or cooling of the building structure on which the sensor is mounted, e.g. due to sunlight, heating or cold water pipes • Connection lines which lead from warmer or colder areas to the sensor Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 32: Installing The Device

    2 screws. Use screws which are appropriate for the wall material. Ensure a sufficient distance from wall trim, door frames, etc. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 33: Assigning Connector Terminals

    Terminals 1, 2: Button interface 1 Terminals 3, 4: Button interface 2 Terminals 5, 6: Button interface 3 Terminals 7, 8: Button interface 4 Opening sensor (temperature/humidity) Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 34: Drill Sketch

    Touch panel, external dimensions 164 x 121 mm Ensure a sufficient distance from wall trim, door frames, etc.! All dimensions in mm. Variations are possible for technical reasons. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 35 Installation Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 36: Initial Start-Up

    Initial start-up 3. Initial start-up Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 37: First Commissioning

    The Physical Address menu displays the current address and the status of the pro- gramming LED (the address is 15.15.250 on delivery). Press the Programming button, in order to address the device to the bus. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 38: Alarm And Error Messages

    No connection to KNX bus! is displayed: • during ETS download (ETS transfers the data to the unit) • when unloading the device in the ETS Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 39: Power Failure, Maintenance Work, Etc. (Restart Of Control System)

    3.4. Behaviour following a failure of power supply Failure of the auxiliary power supply: Nothing is sent, and nothing can be received. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 40 No connection to KNX bus” is displayed on the display. “ Resumption of the bus power supply: As for resumption of the auxiliary power supply Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 41 Initial start-up Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 42: Operation

    Operation 4. Operation Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 43: The Touch Screen

    These values are not retained when the unit is reset. The weather data must then be received again from the bus. 4.2.1. Start Screen/Start Menu Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 44  Alarm and error messages, page 37 Date and time: Once date and time have been received by the KNX Touch One, they appear on the start screen. The time can be displayed with or without seconds.  Settings > Date and Time ...

  • Page 45: Weather Data Display

    From the Start Menu, you get to the weather data display by pressing “Weather Display“ The weather data display is a graphical menu for weather and indoor data, date and time. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 46 Air humidity in %RH The general weather situation is shown graphically: Sunny or cloudy: The sun moves across the sky according to its current direction and height. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 47 Start Menu. Comments about alarm and error messages can be found in the chapter  Alarm and error messages, page 37 To Start Menu (“Home“) Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 48: Universal Menu

    Maintained for longer than Time 1 ==> Up/Down Triggered between Times 1 and 1 + 2 ==> Stop Triggered after Times 1 + 2 ==> No further stop Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 49: Adjustment And Operation - Further Options

    Arrow buttons to increase/reduce a value or to scroll through a list of input possibilities. Extended pressing of a button accelerates its input. Up/Down buttons for manual operation Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 50: Input Keyboard For Names And Codes

    Selects the symbols and special character input keyboard.  Delete. Deletes the preceding characters. Shift key. Switches between upper and lower case letters. Moves the cursor/caret one character to the left/right. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 51: Protect Menus With Access Codes

    ETS.  Setting access codes using the ETS, page 75  Setting access codes at the screen, page 75 Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 52: Adjustment

    Adjustment 5. Adjustment Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 53: Start Menu

    No function Display 1 / 0 Display Up (for value 0) / Down (for value 1) Display Up (for value 1) / Down (for value 0) Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 54 For the object function „Input Brief/Extended“, you can trigger the following com- mands by variing the duration of the button press: Up/down buttons Button was pressed and released before expiry of Time 1 ==> Stop/Step Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 55: Basic Settings

    Remo 8: Only screen Alarm: ETS and screen Phys. Addresse: Only screen Service: Access Codes: ETS and screen Service: Reset, Factory Defaults etc.: Only screen Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 56: Basic Setting In The Ets

    If you transfer parameters, the settings which have been made manually on the screen will be overwritten. The setting options of the parameters are discribed in the chapters Language, Date and time ... Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 57: Settings Menu At The Screen

    Screen* (brightness, switch-off, colour, surface operation, touch calibration) • Texts (names for functions in the Start, Universal and Scene menu) • Automatic (general settings for all drives/light applications) Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 58: Language

    ETS menu. Then set the display of seconds, the time zone and the summer time rule in the appearing “Date and time“ menu. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 59 Start of Summer Time: On the first Sunday After (day) (Month) (Hour) (Minute) End of Summer Time: On the first Sunday After (day) (Month) (Hour) (Minute) Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 60: Enter The Date And Time At The Screen

    (e. g. received via GPS), the time zone (in relation to GMT) must be specified. Ad- ditionally, the automatic switch-over to summer time can be set. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 61: Location

    (shading automation). If this location data is not correct, the shading elements will not be correctly controlled. The location is entered using the ETS or at the screen. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 62: Setting The Location Using The Ets

    Easterly longitude and Northerly latitude, and then input the ° values using the arrow buttons. Confirm your setting using the OK button. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 63: Display

    1...8 = Universal menu pages 1...8 10 = Weather data display 11 = Start screen 5.2.6.2. Setting the display at the screen Press the buttons: Display Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 64 If the screen is touched, it also re-activates. If no command is given for around 1 minute, the automatic switch-off darkens the screen again. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 65 To choose a different background colour for the operation menu, press the button and select Blue, Grey, Red, Green or Yellow. Confirm your setting using the OK button. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 66: Texts

    Scene 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 ... / 16 Text field (default setting: Scene 1 - 16) 5.2.7.2. Changing text at the screen Press the buttons: Start menu Texts Universal menu Scene menu Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 67: Automatic Settings

    10 lux, shades which are set to “close at night” will re- main open because of the moonlight or retract during the night. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 68: Change Automatic Settings At The Screen

    0...23; 3 Time (minutes) 0...59 after (in minutes) 5...480; 60 to automatic after manual operation. 5.2.8.2. Change automatic settings at the screen Press the buttons: Automatic Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 69 Use the arrow buttons to set the values for the extension and retraction delays. Pre- setting: Extension 1 minute, retraction 12 minutes. Confirm your setting using the OK button. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 70 (e. g. 5 hrs). A drive or curtain can be damaged if an external shade which has frozen stiff is retracted! Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 71: Th Sensor

    Temperature and humidity deviations due to various malfunctions can be corrected in the ETS: Temperature offset (in 0.1 °C) -70...70; 0 Humidity offset (in % absolute) -20...20; 0 Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 72: Setting The Th Sensor At The Screen

    No • Yes 5.2.9.2. Setting the TH sensor at the screen Press the buttons: Adjust TH Sensor The menu is code-protected when access code 2 is activated. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 73: Remo 8 Remote Control

    With the optional radio remote control Remo 8, drives (or dirve grous) and lights (or light groups) configured at the Room Controller KNX Touch One can be operated. The hand-held transmitter must be taught to the KNX Touch One via a screen menu first. Press the buttons: Remo 8 Room Controller KNX Touch One •...

  • Page 74: Alarm

    Device successfully taught” and beeps. Press  to return to the menu. “ Assing channels At the screen of KNX Touch One, select the hand transmitter channel you want to program (Channels 1 to 8). Select the drives or light applications which you want to operate using this channel (multiple choices are possible).

  • Page 75: Setting An Alarm Using The Ets

    Confirm your settings by pressing the OK button. 5.2.12. Addressing the unit The physical address is assigned using the display screen menu Settings > Phys. Ad- dress. Press the buttons: Phys. Adrdess Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 76: Service / Access Codes

    If no value is entered, the access code is not activated. 5.2.13.2. Setting access codes at the screen Press the buttons: Access Code 1/2 Service Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 77: Reset

    After re-starting, all drives and units will be set to Automatic mode. The Re- set function settings can be accessed by pressing the buttons: Reset Service Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 78: Factory Defaults

    Use light 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 Yes as switch or Yes as dimmer Transfer the following parameters No • Yes Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 79: Operate And Adjust Light At The Screen

    After the input waiting period following No • Yes manual operation  Change general automatic settings using the ETS, page 66 5.3.2. Operate and adjust light at the screen Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 80 (if set so, only to a fixed automatic reset). Briefly press and release ==> ON/OF Extended press and hold ==> Dimmer brighter/darker Release ==> Stop Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 81 As soon as you activate the twilight setting (see below), the light will only be turned on at twilight in the selected time periods. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 82 Alternatively, the automatic function can be reactivated at a set time following a man- ual intervention. Activate: To perform an Automatic Reset after a manual intervention, select Yes. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 83: Drives And Ventilation Units

    Please also bear in mind that in the event of a power failure and rainfall, a window will not be automatically closed if no emergency generator is in- stalled. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 84: Setting Blinds Using The Ets

    • Up arrow: Extended 1 | Down arrow: Extended 0 Shading • Never • Always • Brightness-dependent Settings for “Shading: Always“ and “Shading: Brightness-dependent“ see bottom. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 85 (in °) (only when the selected 0...90 angle range is settable) lower than (in °) (only when the selected 0...90 angle range is settable) Movement position (in %) 0...100 Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 86: Setting Awnings Using The Ets

    Transfer the following parameters No • Yes If you transfer these parameters, the settings which have been made manually on the touch display will be overwritten. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 87 Sun height • Any height • Angle range greater than (in °) (only when the selected 0...90 angle range is settable) Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 88: Setting Roller Shutters Using The Ets

    • Up arrow: Extended 1 | Down arrow: Extended 0 Shading • Never • Always • Brightness-dependent Settings for “Shading: Always“ and “Shading: Brightness-dependent“ see bottom. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 89 0...100 Use internal temperature lock shut-off No • Yes (only if an interior temperature lock is used) Allow shading from (in 0.1 °C) 50...400; 250 Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 90: Setting Windows Using The Ets

    • Up arrow: Extended 1 | Down arrow: Extended 0 Use TH sensor No • Yes Settings for use of the TH Sensor (indoor temperature/humidity) see bottom. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 91 Close the window when the supply air No • Yes temp. is higher than the room temperature Use night-time cooling for Period 1 - 16 No • Yes Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 92: Setting Ventilation Units Using The Ets

    Use air humidity No • Yes Start ventilation from (in % rH) 10...95; 80 (only if air humidity is used) Use CO2 No • Yes Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 93: Set And Operate Drives At The Screen

    Use the buttons to select the names to the left of the drive or unit which you want to operate. Use the arrow buttons to scroll through the list. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 94 3.00 am. Use the arrow buttons to set the time when the drives are reset to automatic after manual operation. Pre-setting: 60 min  Settings > Automatic > Automatic Reset  Change automatic settings at the screen, page 67 Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 95: Safety Notes For Automatic Functions

    The following can be set for blinds, awnings and roller shutters: • Give name • Manual operation • Light intensity • Sun direction • Sun height • Movement position Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 96 Manual operation can be defined separately for each drive and each unit. Confirm your input using the OK button. Intesity You can select one of three shading control options. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 97 Direction: If the shade should only be deployed when the sun is in a specific orienta- tion, select as appropriate: West, South-West, South, South-East or East. The thick- ened part of the circle in the centre shows the selected area. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 98 Yes. You can now adjust the slat opening to the changing angle of the sun. Use the arrow buttons beside the % values to do this. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 99 Indoor temperature Press the button to set the interior temperature block. Where no interior room sensor is selected, the interior temperature lock will not be activated. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 100 Confirm your setting using the OK button. To change any of the time periods set in the timer, press Timer.  Setting the timer at the screen, page 124 Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 101 Adjust values: Adjust the values for wind speed and the duration that this is exceeded using the arrow buttons. Deactivate:If the drive need not react to the wind (e.g. for internal awnings), select Do not retract (default setting). Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 102: Setting Automatic Functions For Windows

    Manual direction • Interior room sensor which is evaluated for the window • Indoor temperature • Air humidity • CO2 content • Supply air temperature Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 103 Press the button to select whether the interior room sensor is assessed. If No sensor” “ is selected, the interior temperature, air humidity and CO2 content are not taken into consideration when controlling the windows (default setting). Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 104 < 550 ppm). Shutting off ventilation: If the ventilation should be performed independently of CO2 content, press the OFF button. Confirm your setting using the OK button. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 105 To change any of the time periods set in the timer, press Timer.  Setting the timer at the screen, page 124 Be careful that your timer settings do not prevent night-time re-cooling operations! Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 106 (the alarm has priority over temperature block). Manual operation continues to remain possible, even when the window is blocked be- cause of low outdoor temperatures. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 107 Deactivate: If the security object should not be sent when there is a frost alarm, select No (default setting). Confirm your setting using the OK button. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 108 Activate: If gap opening should be activated when it is raining, select Yes. Deactivate: If the window should be fully closed in the event of rain, select No (default setting). Confirm your setting using the OK button. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 109: Setting Automatic Functions For Ventilation Units

    Indoor temperature • Air humidity • CO2 content • Minimum ventilation • Maximum ventilation • Night-time re-cooling (internal temperature and ventilation steps for night-time re-cooling) Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 110 Shutting off ventilation: If the ventilation should be performed independently of air hu- midity, press the OFF button. Confirm your setting using the OK button. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 111 Confirm your setting using the OK button. To change any of the time periods set in the timer, press Timer.  Setting the timer at the screen, page 124 Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 112 Press the button to switch on or off the setting for automatic operation at a set point in time, or following a manual intervention. The general Automatic Reset occurs daily at the same time. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 113: Temperature Control

    Send actuating variables • on change • on change and periodically Transmit cycle 5 s … 2 h; 5 min (is only transmitted if “periodically” is selected) Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 114 (when switched by means of a “dead zone”) Cooling regulation starts at Actual temperature >= (reference value + dead zone) Switching object value before 0 • 1 1st communication Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 115 1 … 255; 30 (only when controller is set by means of “controller parameter”) Upon shut-off, control variable should • not transmitted • send a specific value Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 116 Set control using • Provided applications • Controller parameter Application • Cooling ceiling (only when the controller is set by means of a “default application”) Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 117 The control variable follows the rule upon triggering For PI control: For possible settings, see Cooling control, first step Night-time reduction: Use night-time reduction No • Yes Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 118 The night-time reduction can be cancelled for the set time with the day extention.  Temperature menu > Night-time reduction  Setting temperature control at the screen, page 118 Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 119: Setting Temperature Control At The Screen

    Window status before 1st communication OPEN • CLOSE 5.5.2. Setting temperature control at the screen You can access the temperature controller via the menu: Temperature Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 120 Unblocking the controller: If the temperature controller must be unlocked, select No. Also status changes of the blocking that were triggered via an object (the bus) are shown here immediately. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 121: Universal Menu

    Text input field S. 1 - 8 Function 1 - 8 Function 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 • No function • Select all object functions Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 122: List Of Object Functions

    Input Extended / Brief Input 8-bit value [0...255] Input 8-bit value [0%...100%] Input 8-bit value [0...360°] Input 16-bit floating point Input 32-bit floating point Input text Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 123: Universal Menu At The Screen

    = 36 km/h 5.6.2. Universal menu at the screen The Universal menu is used for display (e. g. measured values) and operation.  Universal menu, page 120 Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 124: Timer

    0...23 Minute 0...59 Use weekday: Monday No • Yes Tuesday No • Yes Wednesday No • Yes Thursday No • Yes Friday No • Yes Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 125: Setting The Timer At The Screen

    Set the start and end of the time period by selecting each hour and minute field con- secutively and setting the time using the arrow buttons. Holding the arrow button al- lows you to input the time more rapidly. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 126: Scenes

    Use scene 1 - 16 No • Yes When a scene is used, the following values appear: Value 0 • 1 (for “1-bit object type”) Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 127: Scene Activation At The Screen

    The value of the reply message is used as the new scene value. Please note that the L-flag is set in the actuator. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 128: Push-Button Inputs

    If a button with switch function is assigned to the input, select the bus function "Selec- tor switch" and specify if the button should switch when pressed/released. Bus function Selector switch Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 129 -6707600...6707600; 0 Input for scene control: If scenes are called and saved with the input, then choose the "Scenes" bus function and specify the scene number. Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 130 1 + 2 Point in time 0: Push of button, start of time 1 Release before time 1 expired: step (or stop if drive is moving) Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 131: Actuating Variable Comparator 1

    • on change of output • on change of output and periodically • when receiving an input object • when receiving an input object and periodically Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 132: Logic (Ets)

    • the current value after reception of an object 5.10. Logic (ETS) The Room Controller KNX Touch One offers 16 logic inputs, four AND and four OR logic gates. The logic is set in the ETS. Use logic inputs Yes • Non Object value before 1st communication for - Logic input 1...16...
  • Page 133 • send value for logic = 0 • send value for logic = 1 With release [Depends on the setting for “Output (incl. 2 seconds release delay)) sends“] Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 134 • transmit value for current logic status Switching output sends on change and on transmit value for current logic status reception of an object and periodically Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 135 Adjustment Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 136: Tables

    Tables 6. Tables Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.

  • Page 137: Units For Sun And Wind

    28,5-32,6 103-117 56-63 Hurricane > 32,6 > 117 > 63 6.2. Settings data Blind 1-6, Awning 1-4, Roller shutter 1-4: Name Manual direction Brightness (klx) Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 138 Twilight value (lx) Window 1 - 2: Window type without or with step opening Number of steps Name Manual direction TH sensor Yes/No Timed ventilation (period) Yes/No Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 139 Yes/No Night-time re-cooling Yes/No (period, temp.) Window opening (in %) Ventilation: Name TH sensor Yes/No Timed ventilation Yes/No (period) Ventilate in steps (in %) Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 140 (period 1 - 16) AND at night Brightness when ON When dimming (%) Brightness when OFF When dimming (%) Automatic Reset? Reset after manual actuation? Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 141 (0.1 °C) for a set period (in h) Time point for General Automatic Reset Automatic reset following a manual intervention (min) Period 1-16 of switching timer: Name from Weekday Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 142 Tables Name from Weekday Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 143 Tables Room Controller KNX Touch One • Status: 29.04.2014 • Errors excepted. Subject to technical changes.
  • Page 144 Elsner Elektronik GmbH Control and Automation Technology Herdweg 7 D – 75391 Gechingen Phone +49 (0) 70 56 / 93 97-0 info@elsner-elektronik.de Germany +49 (0) 70 56 / 93 97-20 www.elsner-elektronik.de...

Table of Contents