Battery Charging
Please make sure that the battery is fully charged before your first use. To charge the battery,
please connect the matching charger to a power outlet and insert the DC jack end into the
charge interface of LQP7/LQP7H. After a few seconds, the eXiom logo appears on the screen
follow by a picture of a battery being
go blank. While the battery is charging, you
the power button.
Once the charging is completed, please unplug the charger from LQP7/LQP7H and the power
supply connection.
Power on
Hold down the power button until the eXiom logo appears on the screen.
Wait for a few seconds for the system start up to complete. Unlock the tablet to enter the
home screen.
Hibernate
Once booted up, a short press of the power button will put the LQP7/LQP7H to hibernate state.
During hibernation, LQP7/LQP7H will turn off the screen and enter into the standby condition,
where it will consume very little power. Another short press of power button will bring the
LQP7/LQP7H out of hibernation and you can continue with your operation.
Battery Charging Diagram
charged. After a few seconds the screen will
can view the charging progress by pressing
6