Table of Contents
Advertisement
The wires in the power cord are colored as follows: blue = neutral (N), brown =
live (L).
If the colors do not correspond with the colors on your plug, identify the terminals
in your plug as follows:
1
Connect the blue wire to the terminal marked N or colored black.
2
Connect the brown wire to the terminal marked L or colored red.
3
Do not connect either wire to the earth terminal in the plug, marked E (or
e) or colored green (or green and yellow).
Before you replace the plug cover, make sure that the cord grip is clamped over
the sheath of the cable and not just over the two wires in the cable.
This 'bolt of lightning' indicates uninsulated material within the device may cause
an electrical shock. For the safety of everyone in your household, please do not
remove the covering.
The 'exclamation mark' calls attention to features for which you should read the
enclosed literature closely to prevent operating and maintenance problems.
WARNING: To reduce the risk of fire or electric shock, the device should not be
exposed to rain or moisture and objects filled with liquids, such as vases, should
not be placed on the device.
CAUTION: To prevent electric shock, fully insert the plug. (For regions with
polarized plugs: To prevent electric shock, match wide blade to wide slot.)
•
Only use attachments/accessories specified by the manufacturer.
•
Use only power supplies listed in the user manual.
•
The product shall not be exposed to dripping or splashing.
•
Do not place any sources of danger on the product (e.g. liquid filled objects,
lighted candles).
•
Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, fire or the like.
•
Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type.
EN
13
Advertisement
Table of Contents
