Table of Contents
Advertisement
Quick Links
OUTDOOR BLUETOOTH
PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS
UNIT AND RETAIN THIS GUIDE FOR FUTURE REFERENCE.
The Maxell IKUtrax is an Outdoor Bluetooth portable Speaker with the following features:
Wireless playback of music from your Bluetooth enabled mobile phone or devices via
the Bluetooth connection
Water Resistant & Dustproof (IP55), and Shock Resistant.
NFC Connectivity
Up to 33 feet (10 meters) line-of-sight operating distance
Hands-free phone conversation
Remotely control your music (play, pause, next track, previous track)
Aux-in connection providing instant 3.5mm stereo audio cable connection to any device.
Carefully remove the unit and all the accessories from the packaging. Please verify
that you have the Quick Start Guide, 3.5mm AUX-in cable and Micro USB charging
cable before recycling the box.
Fully charge your IKUtrax before initial use.
Use the included Micro USB cable to connect your MXSP-BTS150 to the USB slot of
any PC to charge. The RED LED will turn on while charging and will turn off
automatically when fully charged.
IKUtrax
(MXSP-BTS150)
WITH NFC FUNCTION
USER MANUAL
PRODUCT FEATURES
GETTING STARTED
®
SPEAKER
Advertisement
Table of Contents
Summary of Contents for IKUtrax MXSP-BTS150
-
Page 1: User Manual
Fully charge your IKUtrax before initial use. Use the included Micro USB cable to connect your MXSP-BTS150 to the USB slot of any PC to charge. The RED LED will turn on while charging and will turn off automatically when fully charged. - Page 2 PAIRING MODE From OFF, Push and hold the centre button for 8 seconds. After 5 seconds the speaker will indicate that it is ON. Keep holding without releasing for another 3 seconds, and the speaker will enter Pairing Mode. The LED light will flash Blue rapidly.
- Page 3 FUNCTION BUTTON INDICATOR Behaviour Description Press and hold the function key for 5 seconds Power turn on/off Press and hold the function key for 8 seconds Pairing Click function key once Answer/End call Double click function key during the incoming Reject call ring.
- Page 4 PAIRING (LINKING) A BLUETOOTH ENABLED MOBILE PHONE OR OTHER BLUETOOTH ENABLED DEVICE TO THE MXSP-BTS150 1. If the IKUtrax has never been paired with a Bluetooth device before. You need to follow the pairing instructions below to link the speaker with your Bluetooth device.
- Page 5 3. Adjust the volume control of the speaker to obtain the desired sound level. 4. To end the call, just press the function key again on your IKUtrax. A short beep sound will be heard and the call will end. If you were playing music from your mobile phone to the IKUtrax before answering the call, the music will automatically resume playing when you hang up.
- Page 6 USB port. The IKUtrax battery is Recharge the IKUtrax battery. dead. Go through “Speaker Operations” process to The IKUtrax is not linked No Sound with your mobile phone. link the Speaker The IKUtrax placement is Relocate the IKUtrax within Bluetooth out of range.
- Page 7 SPECIFICATIONS General Specifications Compatible I/O Bluetooth v3.0 (Class II: 10m range) Support Profile HSP, HFP, A2DP, AVRCP Output Frequency Range 2.400~2.484 GHz Frequency Hopping FHSS（Frequency Hopping Spread Spectrum） Bluetooth PIN code 0000(simple pairing) IPx5 Water Proof Support two devices Multi-point Paired device RF Performance Max.