Vidipac VSW7242 User Manual page 78

This page provides IP Source Guard related configuration.
Mode of IP Source Guard Configuration
Enable the Global IP Source Guard or disable the Global IP Source Guard. All configured ACEs will be
lost when the mode is enabled.
Port Mode Configuration
Specify IP Source Guard is enabled on which ports. Only when both Global Mode and Port Mode on a
given port are enabled, IP Source Guard is enabled on this given port.
Max Dynamic Clients
Specify the maximum number of dynamic clients that can be learned on given port. This value can be 0, 1,
2 or unlimited. If the port mode is enabled and the value of max dynamic client is equal to 0, it means only
allow the IP packets forwarding that are matched in static entries on the specific port.
Buttons
Save: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
Translate dynamic to
Static IP Source Guard Table
Delete
Check to delete the entry. It will be deleted during the next save.
static: Click to translate all dynamic entries to static entries.
78