Page 2
For product service or technical advice, contact only authorised Cyrus or against them, paying particular attention to cords at plugs, convenience service centres. Contact details for Cyrus distributors may be found on receptacles, and the point where they exit from the product.
Now is a good time to register your new Cyrus product. Registration takes only a few minutes, brings the added benefit of a full two year factory warranty and adds you to our mailing list for future product updates and upgrades.
Optical and digital inputs for connection of CD players, DAB radios, digital TV receivers or other sources with SPDIF digital connection. A digital output for connection to a Cyrus amplifier equipped IN 1 IN 2 IN 3 DIG OUT with digital inputs.
Setting up a network music library Will a Streamline connect to a Cyrus audio system? Choosing a file format for your library The Streamline may be used ‘stand-alone’ connected directly to a pair of...
500GB and must be formatted as FAT16 or FAT32 only. All-wireless system Although Cyrus wi-fi technology can provide a really easy installation solution, wireless transfer can be affected by the building and other wi-fi equipment, Therefore, where possible, a wired installation is recommended for the best transfer of large files.
Page 7
User Instructions Preparations for Installation Connecting digital audio sources Before installing your Cyrus Streamline check that the following items The digital audio inputs are compatible with a number of different digital are included in the accessory box. audio sources. These include- •...
Page 8
BUS output of the final component to the MC-BUS input of the first. The diagram below shows MC-BUS wiring of a typical system that includes a Streamline (used as the system amplifier), and a Cyrus CD player and tuner that are connected as digital sources to the Streamline Cyrus Streamline...
Cyrus Streamline series User Instructions First time use The Streamline is an extremely powerful and versatile audio streamer. • Follow the instructions later in this handbook to set up the n-remote The n-remote remote control is also a powerful and versatile partner for with your Streamline and other system components you may own.
User Instructions Cyrus Streamline series Connecting to a network To play music from a music library on your network When switched on, the Streamline logo and a progress bar are displayed • Press the MUSIC key. while the unit searches for a network.
Cyrus Streamline series User Instructions To play Internet radio To play from a USB source NOTE: To receive Internet Radio, the Streamline must be connected to • Press the AUX key repeatedly to select USB. the Internet through a network.
/Stream XP is connected as a digital or analogue The display will now prompt for a DNS2 address. source of a Cyrus audio amplifier, select the option ‘Used as a source’. • If you want to enter a DNS2 address, follow the same procedure to enter the DNS2 address in the same format.
Page 13
Setup - About Choose this option to display information about the firmware installed in the Streamline . You may be asked for this information if you contact Cyrus for service or support of your system at any time.
Page 14
User Instructions Cyrus Streamline series Menu Map A full menu map for the Streamline is shown below, including both source selection and setup options. Network Navigate to music Choose UPnP server Input 1 Input 2 Source Input 3 Input 4...
Page 15
Cyrus Streamline series User Instructions Getting started with the n-remote Unpack the n-remote and check that the following items are included in the accessory box. • n-remote • Charging dock • Charger • Charging cable After removing these items, please retain the packaging.
Page 16
12:30 Not connected • Choose ‘CyIR’ if you have Stream CyIR connected the Streamline as an The System-Settings menu will be displayed. input to a Cyrus stereo amplifier. • Highlight the ‘Start Pairing’ System-Settings The n-remote volume buttons will option. User-Settings now operate the volume control of a •...
Page 17
Re-chargeable operation with a charging dock. Up cursor - navigates up a menu list on the display, also browses • Infra-red remote control of a Cyrus stereo system. alphanumeric characters when renaming etc. Hold the button to • Infra-red programming function to control non-Cyrus equipment.
Select the TuneIn Radio icon to listen to Internet Radio. listed in the section ‘Controlling a • Select the USB icon to listen to a USB source. Cyrus Audio System’ on page 21. • Select the iPod icon to listen to an iPod connected to the USB port.
Page 19
Cyrus Streamline series User Instructions The ‘Now Playing’ display You can continue to browse and select in the same way. For example, the Genre category may include sub-categories for Blues, Classical, Country When music is playing from a Streamline , the Now Playing display etc.
Page 20
User Instructions Cyrus Streamline series To play Internet radio To play from an iPod • From the Home Menu, select the TuneIn radio option. • From the Home Menu, select the iPod option for a connected iPod, iPhone or iPad.
Page 21
Cyrus Streamline series User Instructions To play from a USB device To change the settings of the Streamline unit • From the Home Menu, select the USB option for a connected memory From the remote control you can change all settings of a Streamline stick, hard drive or personal audio player.
Page 22
2& ENTER Controlling TVs, PVRs and other non-Cyrus equipment In addition to the control of Cyrus Audio components, you can add remote control command systems to the n-remote to control other (non-Cyrus) equipment. These additional remote control responses are downloaded from an on- line library at the Cyrus website and are installed on the n-remote as ‘devices’...
Page 23
This section includes advanced features of the n-remote. If extra features and upgrades become available for the Streamline Alphabetic search future, details will be published on the Cyrus website at www.cyrusaudio. com. When navigating menus, you may quickly search for the first letter of a...
User Instructions Cyrus Streamline series Setting up the n-remote User-Settings - Brightness You can change the brightness of the display with this setting. The n-remote set-up screens are navigated in the same way as music • Highlight and select the Brightness option.
For example, if your system includes a Streamline connected to the To change to a different zone digital input of a Cyrus amplifier, you may want to re-assign the n-remote • Highlight and select the ‘Change Change Zone volume and mute buttons to control the Cyrus amplifier as follows - Zone’...
‘Sharing’ and enable sharing for your preference of all devices, or just • Select the DHCP Settings option. the Cyrus Streamline • Confirm that the ‘On’ option is checked under the DHCP heading. If Once the settings are saved you should be able to find the server at the not, change the setting to ‘On’...
THD+N (Pre-out, 0dB FS) ............<0.002% Power amplifier performance (Streamline only) only) ..........30W//8 Ω Power output (Streamline THD+N Speaker out (Streamline only) ........<0.01% S/N ratio (ref 1W) ..............>80dBA Cyrus reserves the right to change all specifications without notice. E&OE...
Page 28
Cyrus Audio Ltd., Ermine Business Park, Huntingdon, PE29 6XY, U.K.
Need help?
Do you have a question about the Stream X2 and is the answer not in the manual?
Questions and answers