Fiat Radio with Compact Disc player User Manual page 24

Selecting the frequency band
If in the Radio mode, briefly and repeatedly press
button 12 (BN-AS) to select the required reception
band.
Every time the button is pressed the following bands
are selected in sequence "FM1", "FM2", "FMT","MW"
and "LW" shown by the respective wording on the
display.
The last station selected in the relevant frequency
band will be tuned even if the station is not stored on
a preset button.
If selected station is stored on one of the presetting
buttons, the display will show the presetting number
for few seconds; then the display will show again the
station frequency.
The FM band is divided into sections: FM1, FM2 and
FMT. The FMT reception band is reserved to the
stations stored automatically with the AutoSTore
function.
The radio is always ready to receive stations in the
RDS mode (Radio Data System).
Presetting buttons
The buttons with symbols from 1 to 6 ("16", "15",
"14", "11", "10", "9") make it possible to set the
following presettings:
❒ 18 in the FM band (6 in FM1, 6 in FM2, 6 in FMT);
❒ 6 in the MW band;
❒ 6 in the LW band (on certain versions only);
❒ 6 types of PTY programming (only in the FM mode
when PTY is selected).
To call a preset station, choose the required frequency
band and then press briefly the corresponding preset
button (from 1 to 6). For a few seconds the display
will show the number of the station preset and the
related frequency before showing the frequency band
and the name of the RDS station.
If the PI (Program Index) code is not received at the
frequency allocated to a preset button, the radio will
start searching this PI on another frequency as soon as
the car leaves the area covered by the previous
frequency. The display will show "SEARCH".
23