Advertisement
Quick Links
Models RG30 and RG50
Instruction Manual for the
Model
For Service on Your Roller Grill
1. Visit our website at www.globeslicers.com
(select the Support / Parts drop down).
2. Or call the Globe Service Department at 937-297-7247 and ask for contact
information for your local service company.
Visit our website for information on additional products available from Globe.
www.globeslicers.com
Slicers, Mixers, Countertop Cooking Equipment, Meat Choppers, & Scales
- IMPORTANT SAFETY NOTICE -
This manual contains important safety instructions which
must be strictly followed when using this equipment.
Globe Roller Grill
RG30 & RG50
Serial #:
Advertisement
Related Manuals for Globe RG30
Summary of Contents for Globe RG30
- Page 1 For Service on Your Roller Grill 1. Visit our website at www.globeslicers.com (select the Support / Parts drop down). 2. Or call the Globe Service Department at 937-297-7247 and ask for contact information for your local service company. Visit our website for information on additional products available from Globe. www.globeslicers.com Slicers, Mixers, Countertop Cooking Equipment, Meat Choppers, & Scales - IMPORTANT SAFETY NOTICE - This manual contains important safety instructions which must be strictly followed when using this equipment.
-
Page 5: Table Of Contents
ATTENTION OWNERS AND OPERATORS ........................6 INSTALLATION ............................... 7-8 SAFEGUARDS & SAFETY INSTRUCTIONS ......................9 OPERATING INSTRUCTIONS ..........................10 CLEANING INSTRUCTIONS ............................11 TROUBLESHOOTING ..............................12 LIMITED ROLLER GRILL WARRANTY ........................13 GLOBE FOOD EQUIPMENT COMPANY 2153 DRYDEN RD. DAYTON, OH 45439 PHONE: 937-299-5493 TOLL FREE: 800-347-5423 FAX: 937-299-4147 E-MAIL: globeinfo@globeslicers.com WEBSITE: www.globeslicers.com © Globe Food Equipment Company, 2010 10-2010... -
Page 6: Attention Owners And Operators
Attention Owners and Operators Globe’s equipment is designed to provide safe and productive processing, cooking and warming of food products as long as the equipment is used in accordance with the instructions in this manual and is properly maintained. Unless the operator is adequately trained and supervised there is a possibility of serious injury. Owners of this equipment bear the responsibility to make certain that this equipment is used properly and safely, and to strictly follow all of the instructions contained in this manual and the requirements of local, state or federal law. Owners should not permit anyone to touch this equipment unless they are over 18 years old, are adequately trained and supervised, and have read and understood this manual. Owners should also ensure that no customers, visitors or other unauthorized personnel come in contact with this equipment. Please remember that Globe cannot anticipate every circumstance or environment in which its equipment will be operated. It is the responsibility of the owner and the operator to remain alert to any hazards posed by the function of this equipment. If you are ever uncertain about a particular task or the proper method of operating this equipment, ask your supervisor. This manual contains a number of precautions to follow to help promote safe use of this equipment. Throughout the manual you will see additional warnings to help alert you to potential hazards. Warnings affecting your personal safety are indicated by: Warnings related to possible damage to the equipment are indicated by: If any warning labels or this manual are misplaced, damaged, or illegible, or if you require additional copies, please contact your nearest representative or Globe directly for these items at no charge. Please remember that this manual or the warning labels do not replace the need to be alert, to properly train and supervise operators, and to use common sense when using this equipment. -
Page 7: Installation
TYPE, CONTACT AN ELECTRICIAN. DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE THIRD GROUND PRONG FROM THE POWER CORD OR USE ANY ADAPTER PLUG (Fig. 7-1 and Fig. 7-2). Fig. 7-1 Correct Fig. 7-2 Incorrect 1. Complete the warranty card and mail it to Globe or register online at www.globeslicers.com/warranty.asp. 2. Roller grill and outside covering/containment unit may become HOT after use. Use caution when touching the unit. INSTALLATION 1. Read this manual thoroughly before installation and operation. DO NOT proceed with installation and operation if you have any questions or do not understand anything in this manual. Contact your local... - Page 8 Installation 5. The installation of the roller grill must conform to the NATIONAL ELECTRIC CODE AND ALL LOCAL ELECTRIC CODES AND ORDINANCES AND ALL THE LOCAL ELECTRICAL COMPANY RULES AND REGULATIONS Additionally we recommend that the roller grill is allowed a 4” spacing surrounding the unit in order to provide adequate ventilation. NOTICE: Local codes regarding installation vary greatly by area. The National Fire Protection Association, Inc, states in its NFPA 96 latest edition (see NFPA page at the beginning of this manual) that local codes are “authority having jurisdiction” when it comes to requirements for installation of equipment. Therefore, installation should comply with all local codes. 6. For your protection we recommend that a qualified electrician install this roller grill. They should be familiar with electrical installations and all electrical codes. 7. Proper connections and power supply are essential for efficient performance. 8. The external wiring should be in conduit or an approved type of flexible cable suitable for operation at temperature indicated at the conduit hole, and in a proper size to carry the load. 9. The supply circuit should be properly fused and equipped with a means of disconnecting, as required by the local electrical code. For roller grill with plugs and leads set, simply provide a suitable power point and connect. This equipment gets EXTREMELY HOT so make sure all flammable/combustible materials are set away from this equipment. Leveling The roller grill comes standard with rubber non-slip feet. Please ensure a firm, level surface is used when placing this unit. Assembly Ensure the catch tray is installed before each use. The use of this tray will assist in keeping the roller grill clean and hygienic and enable for easy cleaning. COMMISSIONING: Commissioning of your new roller grill is of the utmost importance. Commissioning is the thorough and methodical testing of the equipment, sub systems, and systems to ensure that the final product functions properly and safely at the work site. By identifying any potential problems (i.e.: equipment location, ventilation, local fire/electrical codes, installation, operator training and certification) prior to equipment being placed into service, costly outages and potential damages may be avoided.
-
Page 9: Safeguards & Safety Instructions
• Do not operate any equipment with a damaged cord or plug or after the appliance malfunctions or is dropped or damaged in any manner. Call for service. • The use of attachments not recommended or sold by the manufacturer may cause fire, electrical shock or injury. • Do not use outdoors. • Do not let power cord or the extension cord hang over edge of table or counter or touch hot surfaces. • Do not place on or near a hot gas or electric burner, or in a heated oven. • Do not use this equipment for any use other than the use intended by the manufacturer. • Do not yank on any cord to disconnect. • Never plug equipment in where water floods the area. • Place the appliance on a firm, stable surface. • The Globe roller grill does not contain any user-serviceable parts. Globe dealers or recommended qualified technicians should carry out repairs. Do not remove any components or service panels on this product. • Globe takes every care to ensure that all products are safe. Steel cutting procedures used to manufacture these items result in sharp edges. These sharp edges are removed to the best of our ability; however, we insist the operator take care when in contact with this piece of equipment. • During operation the roller grill reaches high temperatures, in turn, heating any stainless steel surfaces. Take extreme care when operating. • Switch off power, and disconnect from, the main / plug from wall for cleaning. • Allow the roller grill to cool down after use and before dismantling for cleaning; the unit will be too hot to handle immediately after use. • The Globe roller grill is equipped for the voltage indicated on the nameplate mounted on the rear of the unit. This roller grill is designed for use on alternating current (AC) only. Page 9... -
Page 10: Operating Instructions
Operating Instructions Operating the Roller Grill Before operating roller grill, it should be checked to see that it is sitting level. Ensure the roller grill is level, the unit is clean, and all parts are installed correctly including the catch tray . Please allow 8-10 minutes for warm up time. Cooks product in 3-10 minutes depending on likeness. NOTE: Upon first use, roller grill may omit a metal-burning smell. This is normal and smell will regress with use. 1. The main On/Off switch is located on the front panel in line with the control dials. 2. Switch the On/Off switch “ON”. 3. The On/Off switch will activate the rollers, but heat will not be supplied to the elements. The heat setting is controlled by the dials also located on the front panel. These dials offer the following settings. Cooking Selection: The roller grill has dual control allowing you to isolate the front and back sections of the unit. Each section can be adjusted to the following: OFF: Heating Elements are “OFF”... -
Page 11: Cleaning Instructions
Cleaning Instructions • ALWAYS unplug the roller grill before cleaning. • DO NOT use any cleaning fluids that can be harmful to humans. • DO NOT hose down, immerse or pressure wash any part of the roller grill, excluding the catch tray. • NEVER use a scrubber pad, steel wool or abrasive material to clean the roller grill. ALWAYS DISCONNECT OR UNPLUG THE ELECTRICAL POWER FROM THE Roller grill BEFORE CLEANING. RECOMMENDED CLEANING It takes very little time and effort to keep the roller grill attractive and performing at top efficiency. Please allow the unit time to cool before cleaning. PART REQUIRED ACTION FREQUENCY Rollers Use a clean cloth and warm clean soapy water to clean the stainless Daily steel body of the roller grill. Wipe the polished areas with a soft cloth. Body Use a clean cloth and a non-abrasive cleaner to clean the stainless Daily steel body of the roller grill. -
Page 12: Troubleshooting
ISSUE CAUSE SOLUTION Rollers are not heating up Power supply Check power source Function control has not been Check the unit is correctly turned on plugged in and turned on Internal wiring fault Call for service Element fault Call for service Indicator light is not on, but the The indicator bulb has burned out Call for service. Replace the unit IS heating up indicator light The unit has not been turned on Turn on and adjust the settings Cooking surface is heating up Warm up Allow 5 minutes for unit to warm slowly Lower element off Refer to operating instructions Faulty elements Call for service Rollers are not rotating The unit has not been turned on Turn unit on Adjust the function setting Motor fault Call for service Gears and chain fault Call for service If problems persist and the assigned solution does not remedy the issue, please call our Globe Service Department at: 866-299-8625. Page 12... -
Page 13: Limited Roller Grill Warranty
Limited Warranty Globe Food Equipment Company (“GFE”) warrants to the original purchaser of new equipment that said equipment, when installed in accordance with our instructions within North America and subjected to normal use, is free from defects in material or workmanship for a period of 1 year. The labor warranty is one year from original installation or 18 months from actual factory shipment date whichever date occurs first. Warranty includes onsite service calls within 60 miles of an authorized service company. End user is responsible for all extra travel and mileage at prevailing rates. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESSED OR IMPLIED. GFE EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR EXPRESSED OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. GFE’S OBLIGATION AND LIABILITY UNDER THIS WARRANTY IS EXPRESSLY LIMITED TO REPAIRING AND REPLACING EQUIPMENT WHICH PROVES TO BE DEFECTIVE IN MATERIAL OR WORKMANSHIP WITHIN THE APPLICABLE WARRANTY PERIOD. All repairs pursuant to this Warranty will be performed by an Authorized...
Need help?
Do you have a question about the RG30 and is the answer not in the manual?
Questions and answers