Specifications; Video Specifications; Rear View; Power Connection - Network Electronics ASA VikinX A0108DS User Manual

A0108DS

2 Specifications

2.1 Video specifications

Frequency response:
Crosstalk:
THD+N:
SNR:
Number of inputs:
Input impedance:
Max. input level:
Number of outputs:
Output impedance:
Gain adjustment:
Connector:
Unbalanced inputs:
Input impedance:
AC Power:
DC Power:
Max power consumption: < 9W
Dimensions:

2.2 Rear view

Output 1/2
Power connector

2.3 Power connection

Do not connect mains to the desktop power supply before connecting
the power supply to the router.
Connect the DB9 female connector from the desktop power supply to the
main unit. Tighten the screws to assure a proper contact. To connect mains to
the desktop power supply you need a mains cord with IEC 320 connector.
A0108DS is normally delivered with the desktop power model AC ±15V /
10W. Upon customer request, A0108DS can also be delivered with DC ±15V /
30W, which may be fed by a 36 - 72 VDC mains power source. A Frame
mounted power supply solution is also available.
Please refer to the latest VikinX Product Catalogue for power supply types, or
call the Network Electronics ASA for this information.
A0108DS require ±15V DC with a minimum current of 300 mA. The following
pin-out is used on the DB9 male power connector:
20Hz-100kHz ± 0.1dB.
> -100dB.
< 0.003%.
> 90dB ref. To 0dB 20Hz-20kHz.
4 mono (2 stereo).
> 10 kohms.
+23 dBu.
4x8 mono (2x8 stereo).
< 66 ohms.
± 6dB.
DB25 female.
4 mono.
47 kohms.
External power supplies 100 - 260 VAC
±15V, connector DB9 male
483 x 44 x 45 mm (19", 1RU)
Unbalanced inputs
Gain adjust ½ Input 1 - 4 Gain adjust 3/4
Rev. 5
Output 3/4
5