Core Unit Label - Sony Ericsson W995 Working Instruction, Mechanical

Replacement

4.23 Core Unit Label

Follow the 3.1 – 3.6 Disassembly instructions!
Carry out the replacement as described below.
Follow the 5.13 – 5.18 Reassembly instructions!
REMOVAL
Read the old Core Unit Label and/or write the information
into the 'LabelMake' program before removal.
Carefully remove the Core Unit Label by using the tweezers.
INSTALLATION
Check that the proper label format is loaded in the Zebra
printer and write a new label by using the 'LabelMake'
software.
The Core Unit Label has to be positioned inside the 'golden'
frame as indicated by the pointers.
Place the new Core Unit Label inside the 'golden' frame as
shown in the picture.
One label only is allowed!
1222-6716 Rev 3
©
Sony Ericsson Mobile Communications AB – Company Internal
Working instruction (mech)
36(96)