Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual (or month and year of purchase if product has no number). Keep this manual and the
receipt in a safe and dry place for future reference.
REV 14j
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2006 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Advertisement
Table of Contents
Summary of Contents for Ship To Shore 95563
- Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.
- Page 2 Keep the air openings free of lint, hair, and the like. SAVE THESE INSTRUCTIONS. Page 2 For technical questions, please call 1-888-866-5797. Item 95563...
- Page 3 These carry important safety information. • any other condition that may If unreadable or missing, contact affect its safe operation. Harbor Freight Tools for a replacement. If a problem occurs, have the problem WARNING! If the supply cord of this corrected before further use.
- Page 4 Transducer. Close the Tank Lid. using tongs. 5. Choose from 1 of 5 cleaning cycles: 90S, 180S, 280S, 380S, or 480S. 180S (180 seconds or three minutes) is the typical cycle for cleaning. Page 4 For technical questions, please call 1-888-866-5797. Item 95563...
- Page 5 2. Cord not connected. 2. Check that cord is plugged in. 3. Automatic overheating safety 3. Allow fifteen minute cool-down shut-off feature has tripped. period before attempting to use the Ultrasonic Cleaner. Item 95563 For technical questions, please call 1-888-866-5797. Page 5...
- Page 6 Methods. A temporary adapter, which looks like slot receptacle that will accept the plug on the the adapter illustrated in sketches B and C, may product. Replace or repair a damaged cord. Figure 2: Grounding Methods Page 6 For technical questions, please call 1-888-866-5797. Item 95563...
- Page 7 The manufacturer is not responsible for any interference caused by unauthorized modification to this equipment. Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Item 95563 For technical questions, please call 1-888-866-5797. Page 7...
- Page 8 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 95563 and is the answer not in the manual?
Questions and answers