Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Gefen EXT-DVI-FO-141
Summary of Contents for Gefen EXT-DVI-FO-141
- Page 1 DVI RS-232 Over Fiber EXT-DVI-FO-141 User Manual www.gefen.com...
- Page 2 Notice Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. DVI RS-232 over Fiber is a trademark of Gefen Inc. © 2009 Gefen Inc., All Rights Reserved...
-
Page 3: Table Of Contents
CONTENTS Introduction Operation Notes Features Sender Panel Layout Sender Panel Descriptions Receiver Panel Layout Receiver Panel Descriptions Connecting And Operating The DVI RS-232 Over Fiber Network Cable Wiring Diagram 10 Specifi cations 11 Warranty... -
Page 4: Introduction
The Gefen DVI RS-232 over Fiber The Gefen DVI RS232 over Fiber is a perfect solution for extending and managing control systems, touchscreen or digital signage applications at great distances. -
Page 5: Operation Notes
Use one SC terminated multi-mode fi ber optic cable and one industry standard CAT-5, CAT-5e or CAT-6 cables to operate the DVI RS-232 over Fiber. Gefen recommends CAT-6 cabling for maximum performance. • For 1080p video, maximum extension is 1000 feet (330 meters). -
Page 6: Features
FEATURES Features • Extends any DVI and RS-232 compliant device up to 1000 feet from the computer • Perfect for digital signage applications • Video is transmitted digitally over fi ber optic cable for zero signal loss • Supports resolutions up to 1080p, 2K, and 1920 x 1200 •... -
Page 7: Sender Panel Layout
SENDER PANEL LAYOUT Front Panel Back Panel... -
Page 8: Sender Panel Descriptions
SENDER PANEL DESCRIPTIONS LED Power Indicator This LED will become active once the included 5V DC power supply is properly connected between the sender and an open wall power socket. IR Out (Blaster) An optional IR transmitter/blaster (EXT-2IREMIT) connects to this output port. The IR blaster’s IR emitter will need to be placed on or near the IR receiver of a device for proper relaying of commands from the receiver. -
Page 9: Receiver Panel Layout
RECEIVER PANEL LAYOUT Front Panel Back Panel... -
Page 10: Receiver Panel Descriptions
Infrared (IR) Receiver Extension Port This port will accept an optionally purchased IR extension cable (Gefen part# EXT-RMT-EXTIR). This is useful for installations where the IR receiver, located on the front panel (Item 2 on this page), is not in line-of-sight with the IR remote control used to relay commands to the device at the sender’s location. -
Page 11: Connecting And Operating The Dvi Rs-232 Over Fiber
CONNECTING AND OPERATING THE DVI RS-232 OVER FIBER How to Connect the DVI RS-232 over Fiber Connect the Single-Link DVI-D source to the DVI RS-232 over Fiber sending unit’s DVI input port using the supplied DVI cable. Connect the RS-232 source to the DVI RS-232 over Fiber sending unit’s RS- 232 input port using the supplied DB-9 serial cable. -
Page 12: Network Cable Wiring Diagram
Gefen has specifi cally engineered their products to work with the TIA/EIA-568-B specifi cation. Please adhere to the table below when fi eld terminating cable for use with Gefen products. Failure to do so may produce unexpected results and reduced performance. -
Page 13: Specifications
SPECIFICATIONS Video Amplifi er Bandwidth ............... 165 MHz Input Video Signal ................1.2 Volts p-p Input DDC Signal ................. 5 Volts p-p (TTL) Single Link Range ..............1080p/1920 x 1200 DVI I/O Connectors .......... DVI-I (29 pin) female (digital only) RS232 Input Connector ..............
Need help?
Do you have a question about the EXT-DVI-FO-141 and is the answer not in the manual?
Questions and answers