Download Print this page
Elk Golf GT Lithium Operating Instructions & User Manual

Elk Golf GT Lithium Operating Instructions & User Manual

Golf buggy

Advertisement

Quick Links

OPERATING INSTRUCTIONS & USER MANUAL
Congratulations on the purchase of your ELK Golf GT Lithium
Golf Buggy.
Contained in this manual are detailed operation instructions and
a guide to caring for your new GT Lithium Golf Buggy.
Your new golf buggy has been fully assembled and quality
controlled checked for your convenience
Opening the box
external promotional cover off
the box and the internal
packaging will be obvious.
Place your fingers in the holes
provided and lift off the internal
protective cover of the box.
You will now be able to see the
golf buggy fully assembled and
ready to be removed from the
box.
- Lift off the

Advertisement

loading
Need help?

Need help?

Do you have a question about the Golf GT Lithium and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Elk Golf GT Lithium

  • Page 1 OPERATING INSTRUCTIONS & USER MANUAL Congratulations on the purchase of your ELK Golf GT Lithium Golf Buggy. Contained in this manual are detailed operation instructions and a guide to caring for your new GT Lithium Golf Buggy. Your new golf buggy has been fully assembled and quality...
  • Page 2 Place your hands on the buggy as per the photo and lift upwards to remove the buggy from the box. On the top of the buggy, you will see two Red Levers, which lock the frame into the folded position. Press either one or both of these Red Levers to release the frame lock and lift the rear...
  • Page 3 Lift the fully extended handle upwards enough to allow the rear support section of the frame to join with the handle assembly as per the photos. Once again press either or both of the Red Levers to lock the two sections of the frame together.
  • Page 4 You will be able to see three optional settings, for the distance that the seat can be placed depending on the size of your golf bag. We highly recommend that you make a final adjustment of the seat position, once you have fitted your golf bag to the buggy.
  • Page 5 Lower the seat down into position above the seat mount bar and place section highlighted by arrows into the opening on the seat mount bar. The picture shows the seat mounted in its fully installed position Fitting the Sand Bucket Holder - remove the sand bucket holder from the box and...
  • Page 6 Slide the Sand Bucket Holder on until it is fully attached and tighten by hand the securing screw, as per the photo. Fitting the Umbrella Holder Remove the Umbrella Holder form the box and remove the protective wrapping. The Umbrella Holder is designed to fit either side of the buggy.
  • Page 7: Connecting The Battery

    The Battery - Your new GT Lithium Golf Buggy, comes standard with our exclusive PoweOn light weight lithium Battery. To obtain maximum performance and many years of trouble free operation, please read the specific Battery and Charger instructions, enclosed within the box that houses your Battery and Charger.
  • Page 8 Connect the Battery Lead attached to the battery, onto the power connection of the buggy, as per the photos. PLEASE NOTE - You will notice that both the battery lead and the power connection on the golf buggy have Red and Black connectors.
  • Page 9: P Ower Indicator Lights

    ower indicator lights Once you have connected the Battery to the Golf buggy, three Red Lights will appear on the Handle of the Golf Buggy and remain on 15 seconds. During the 15 seconds that the three red lights appear on the Top handle, a full systems check is taking place and once the three Red Lights have switched off, this is...
  • Page 10 Using the Preset Distance Control Function - Your GT Lithium Golf Buggy comes with three pre set distance control options.15 meters, 30 meters and 45 meters. The purpose of this function is to allow you to choose one of the three pre set distances and let the buggy travel on its own, for the distance that you have chosen and stop automatically when the chosen distance has been reached.
  • Page 11 PLEASE NOTE - The speed of the buggy when the Distance Control function has been activated and has been pre set for your convenience. The buggy will only travel at the pre set speed, regardless of what position the speed control knob on the handle is set to.
  • Page 12 Wrap the upper bag strap around your Golf bag and adjust the length as required. Lock the two sections of the retaining clip together, as per the photo. Pull on the upper bag strap until the bag is secure, as per the photo.
  • Page 13 Collapsing the Buggy for transport and Storage Begin by disconnecting and removing the Battery from the buggy completely. Lift upwards on the Top Bag Support until the bag support is in the fully upward position, as per the photo. Press down on ether or both of the Red Frame Lock Levers and unlock the frame.
  • Page 14 Fold down the upper section of the handle fully. Lay the rear support section of the handle down and ensure that the folded handle is completely lowered down into the Battery Tray, as per the photo. Lift and fold the rear support section of the frame which houses the two Red Levers, until it meets with the folded handle,...
  • Page 15 Press either or both of the two Red Levers and lock the rear support section of the frame and the folded handle assembly together, as per the photos. Your buggy is now ready for lifting and storage.
  • Page 16 Removing The Rear Wheels - You may wish to remove your buggies rear wheels, please ensure that the following instructions are followed carefully. The rear wheels of the buggy can only be fitted to the side of the buggy that they correspond with. There are markings on the inside of each wheel, L for left and R for right.
  • Page 17 To Remove the Rear Wheels - Press and hold the Red button located in the centre of the wheel and pull the wheel away from the buggy, as per the photo. To Refit the Rear Wheels Press and hold the Red button located in the centre of the wheel and slide the wheel inwards onto the axle, until the locating pin is...
  • Page 18 Adjusting the front wheel tracking. This function is designed to enable you to adjust the straight line tracking for your golf buggy if required. Firstly, you must release the cam lock mechanism as per the photo and adjust the thumb wheel. Shortening the length of the adjusting screw by use the of the thumb wheel will cause the...
  • Page 19 Caring for your new GT Lithium golf buggy - if you wish to clean your new golf buggy, this can be done by easily and safely by simply using a damp cleaning cloth. Avoid using any harsh cleaning chemicals as they may dis-color or damage the specially prepared UV resistant surfaces of the buggy.