Download Print this page

Edison DJ PRO 6100+ Quick Start Manual

15" two way powered speakers

Table of Contents

Need help?

Do you have a question about the DJ PRO 6100+ and is the answer not in the manual?

Page 2: Quick Start
= On Switch = AC Power cord connection DJ PRO 6100+ QUICK START POWER UP...
Page 3 DJ PRO 6100+ XLR SPEAKER CABLES – PLUG INTO BOTTOM FEMALE CONNECTION TO THE SPEAKER...
Page 4 ACT1505 – Powered Speaker – DJ PRO 6100+ *DO NOT PLUG MIC 1 SCRATCH 2500 Input INTO MIC 1 or MIC ONLY!!! 2 Inputs –This will MIC 2 cause Loud Static & Input the Transformer to ONLY!!! OVERHEAT!!! CORRECT INPUT FOR MUSIC (SCRATCH 2500) *It is OK to use Link Output...
Page 5 Make sure Volume knobs are turned up. DJ PRO 6100+ TURN IT UP...
Page 6 Make sure all Volume is up turned up. Master Volume - DJ PRO 5000 - Gain Channel 2 Gain Channel 1 – (Adds Distortion & Volume) (Adds Distortion & Volume) Channel 1 Volume Slide - - Channel 2 Volume Slide The X-Fader determines which side of the Scratch 2500 plays music through the Speakers –...
Page 7 - *PLEASE DO NOT HAVE TOO MUCH FUN!!! the 3.5 to RCA cord in the back of the Scratch 2500 (21 & 23 Below). Edison Scratch 2500 Phono/ ON/OFF DJ Mic XLR SPEAKER...
Page 8 DJ PRO 6100+ Includes • (2) – High Powered Speakers (1) – 3.5MM to Dual RCA Cable  – Model No. ACT1505-2500 Model No. 352RCA • – 1200 Watts Peak; 600 Watts Used to hook up phones & • computers. Continues –...