1. Manuals
  2. Brands
  3. Sea Hunt Manuals
  4. Boat
  5. 2012 Gamefish series
  6. Owner's manual

Sea Hunt 2012 Gamefish series Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Enlarged version
Dear Sea Hunt Owner:
Welcome to the Sea Hunt owner's family! Buying and owning a
boat is a very special experience. Of all the many products
you'll ever own we want your Sea Hunt experience to be the
absolute best. That means providing the descriptions, explana-
tions and technical support that you need to enjoy your Sea
Hunt with confidence and security.
The seaworthiness and safety of your Sea Hunt is highly de-
pendent on the operation, maintenance and care of your boat,
so please read this manual thoroughly and keep it around for
reference. If you need further explanation or "hands-on" help,
don't hesitate to ask the people at your Sea Hunt dealership;
they have experience with the systems and operations of your
boat. If for any reason you need additional help, please feel
free to call us at the factory. We sincerely want to provide you
with the help and information that will make your Sea Hunt ex-
perience delightful.
Thanks for choosing a Sea Hunt. All of us at the factory and at
your dealership are dedicated to earning your confidence in Sea
Hunt Boats. Again, welcome to the family.
Sincerely yours,
Bubba Roof
President
SEA HUNT BOATS, INC.
Sea Hunt Boats
2348 Shop Road
Columbia, SC 29201
Phone: (803) 755-6539
Fax: (803) 755-3399
www.seahuntboats.com
1
64

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2012 Gamefish series and is the answer not in the manual?

Questions and answers

Related Manuals for Sea Hunt 2012 Gamefish series

Summary of Contents for Sea Hunt 2012 Gamefish series

  • Page 1 Sea Hunt ex- perience delightful. Thanks for choosing a Sea Hunt. All of us at the factory and at your dealership are dedicated to earning your confidence in Sea Hunt Boats. Again, welcome to the family.

  • Page 2: Table Of Contents

    (b) SEA HUNT will repair or replace, at its option, any SEA HUNT hull found to have a Emergency Information ....
  • Page 3 TABLE OF CONTENTS Trim Gauge ..... Stainless Steel Rails & Hardware ..Voltmeter .

  • Page 4: Owners Orientation

    The Sea Hunt warranty is located on the last page of this manual. Upon the purchase of your new Sea Hunt boat, the dealer will fill out a warranty card. This card will be kept on file at the dealership and at the Sea Hunt factory.

  • Page 5: Hazard Warning Symbols

    HAZARD WARNING SYMBOLS The hazard warning symbols shown below are applied throughout this manual to alert the customer of potentially dangerous situations that can lead to product damage, personal injury and/or death. We urge you to observe these warnings and comply with all safety recom- mendations.

  • Page 6: Dealer Pre-Delivery/Delivery Responsibilities

    DEALER PRE-DELIVERY / DELIVERY RESPONSIBILITIES Provide orientation of the general operation of your Sea Hunt pack-  age. A manufacturers warranty registration must be completed and  signed by both the dealer and consumer to validate and activate ESCAPE SERIES PANEL applicable warranties.

  • Page 7: Boat Model Identification

    BOAT MODEL IDENTIFICATION Sea Hunt Boats has a permanent record of your boat, which is identified through the “Hull Identification Number” (HIN). Data regard- ing equipment and accessories, as well as dealer/shipping information 8 CIRCUIT PANEL is documented when your new Sea Hunt is “Warranty Registered”.

  • Page 8: Boating Safety

    PFD at all times. Check your local regulations. SOUND SIGNALING DEVICES 6 CIRCUIT Your Sea Hunt is equipped with an electric WIRING HARNESS horn which meets the USCG requirements for a sound signal device. VISUAL DISTRESS SIGNALS...

  • Page 9: Additional Recommended Equipment

    (see engine operator’s manual) and color codes. Always use marine rated components when perform- ing any work on your Sea Hunt’s electrical system, and ensure all cir- - Local charts and compass cuits have appropriate overcurrent protection. Sea Hunt Boats always recommends using a qualified marine electrician for any repairs or additions to your boat’s system.

  • Page 10: Emergency Information

    If others were on board, try to locate them, and guide them to the  safety of the hull. STAY WITH THE BOAT! All Sea Hunt Boats under 20 feet in  length are designed to meet or exceed level flotation require- ments.
  • Page 11 COLLISIONS HEAD SYSTEMS In 1972 (amended 1987) Congress enacted the Clean Water Act. If you are involved in a collision with another boat or a stationary ob- This law addresses a wide spectrum of water pollution problems, in- ject (reef, sandbar, bridge, pier, etc.), first check everyone aboard for cluding marine sewage from boats in navigable U.S.

  • Page 12: Emergency Stop Switch

    Anchoring can be less laborious if your boat has a windlass acces- yard and lanyard clip. The lanyard clip is sory. Sea Hunt Boats installs an optional 12 volt windlass and a attached to the operator. If a situation stainless steel anchor roller. The windlass is protected by a 50 amp arises where the boat should stop, a pull breaker.
  • Page 13 Do not allow individuals under 16 years of age to operate your  Your Sea Hunt Gamefish has a 12 volt electrical system designed boat. Inexperienced drivers should not be allowed to operate the to provide years of trouble free enjoyment of your boat. All connec- boat without constant and direct supervision.

  • Page 14: Basic Rules Of The Road

    BASIC RULES OF THE ROAD Gamefish Series Owner’s Manual Supplement Boat operation is governed by the International Regulations for the Prevention of Collisions at Sea 1972 (72 Colregs) and the 1980 U.S. Inland Navigation Rules (Inland Rules), also known as the Rules of the Road.
  • Page 15 If any of these critical items are not functioning in accordance with the THE GENERAL PRUDENTIAL RULE manufacturer’s design immediately contact your authorized Sea Hunt The general prudential rule regarding right-of-way is that if a colli- dealer to schedule a thorough inspection and service.

  • Page 16: Loading Capacity

    PRIOR TO LAUNCHING It is recommended that your Sea Hunt boat be re-commissioned by The boat operator should be aware that CO is emitted from any boat’s an authorized dealer. Below is a list of items to check and perform exhaust.

  • Page 17: Suggested Boating Classes And Literature

    To drain other lines, close seacocks and run the pumps until the lines are empty. After emptying the lines, re-open the seacocks. In SUGGESTED BOATING CLASSES AND LITERATURE warmer climates draining will help prevent water stagnation. Boats must be operated according to prescribed safety rules and traffic regulations.

  • Page 18: General Boating Information

    In the water, this is the natural floating attitude of stainless steel as directed under MAINTENANCE. Use a good qual- your Sea Hunt– just keep it balanced side to side (You should al- ity metal preservative like T-9® on all metal surfaces to prevent salt ready have everyone out of the boat when fueling as a normal water damage.

  • Page 19: Fueling

    BEFORE FUELING:  formed by a professional and authorized Sea Hunt dealership. Correctly identify your boat’s fuel fill point. If fueling in-water, posi- BOAT STORAGE ...

  • Page 20: Discharge Regulations

    BATTERY SWITCH tic garbage anywhere in the marine environment. Plastic includes but Your Sea Hunt may be equipped with a dual battery system, with is not limited to: synthetic fishing nets, ropes, lines, straws, six pack a selector switch located near the batteries. The purpose of a dual holders, Styrofoam cups and lids, bottles, buckets and plastic bags.

  • Page 21: Driving

    DRIVING and carburetors. It also shortens the durability of elastomers such as Do not allow passengers to ride in the boat while trailering. Check hose and gaskets. After fueling, inspect the fuel hoses, connections, brakes prior to leaving. Drive as steady as possible and avoid sudden and tanks for tightness, signs of leaks, and deterioration.
  • Page 22 These parts must be washed periodically with a very mild soap and  On extended trips, carry water solution. Sea Hunt recommends washing with a mild soap spare wheel bearings, seals, (such as Ivory Liquid) after each use and every two to three weeks and races.

  • Page 23: Pre-Start Checklist

    PRE-START CHECKLIST STORAGE The following checks are essential to safe boating and must be Consider the following steps when putting your folding top canvas performed before starting the engine. Get in the habit of performing option in the stored position: these checks in the same order each time so that it becomes routine.

  • Page 24: Towing Or Being Towed

    If an awning or boat cover is suitable in size for a washing ma- TOWING OR BEING TOWED chine, these steps should be followed: In the event of a mishap or power loss you may need to tow a Use only mild soaps. No detergent. ...

  • Page 25: Anchoring

    Anchoring can be less laborious if your boat has a windlass ac- One gallon of water.  cessory. Sea Hunt Boats installs a 12 volt windlass and a stainless Clean with soft bristle brush.  steel anchor roller as optional equipment on some models. The wind- Allow mixture to soak for up to 20 minutes ...

  • Page 26: General Information On Boat Handling

    This kit can be purchased through your performance from your boat is to practice and experiment. After Sea Hunt dealer. Acetone is the most suitable cleaning agent for gel- several hours of operation you should experiment with the throttle coat.

  • Page 27: Common Nautical Terms

    COMMON NAUTICAL TERMS the original gloss and color. See a local dealer for advice on wax for your boating region. The wax film will seal the pores as well as en- Abeam - Perpendicular to a boat’s keel, side-to-side hance the looks of your boat. DO NOT wax non-skid surfaces, they Access Plate - A removable, watertight cover that provides quick will become slippery.

  • Page 28: Performance

    EXTERIOR FIBERGLASS FINISH LOAD DISTRIBUTION The exterior finish of your Sea Hunt is a thin layer of resin with a A decrease in performance will be noticed when gear, equip- finished color pigment called gelcoat. Its purpose is to protect the in- ment, passengers and fuel are added.

  • Page 29: Propeller

    Wiring diagrams for several current Sea proper usage and service that is essential for safe and enduring en- Hunt models are included in this manual. Contact the Sea Hunt fac- gine performance. These manuals are included with the Owner’s tory if your wiring diagram is not included.

  • Page 30: Engine Systems

    The engines throttle/shift functions are located at the helm station. the lower unit. Check the intake strainer first if you experience trou- Your new Sea Hunt uses two types of control boxes. All center con- ble. soles use a binnacle / top mount control box. Some dual console TRIP METER boats may use a flush mount control box;...

  • Page 31: Reverse Throttle

    4-STROKE ENGINES Your Yamaha 4-stroke engine is equipped with an engine oil sys- tem similar to an automobile. Sea Hunt factory rigged engines have been filled with the correct amount and type of oil upon installation. The owner should check the oil condition and level after the first few hours of operation, and follow a routine oil change schedule as recom- mended in your engine manual.

  • Page 32: Hydraulic Steering

    RPM (Revolutions Per Minute). Consult TRIM TABS your engine owner’s Sea Hunt Boats installs Lenco trim tabs. The tab planes manual for the rec- mounted on the transom of the boat are actuated by a electric ram ommended operat- piston. Two switches at the helm operate the trim tabs. The ing RPM range.

Table of Contents

Save PDF