SportCrafters ROLLER FORK STAND Quick Instructions

Care and maintenance

 Always wipe off the roller after use to avoid any corrosion to the
drum and/or frame. Use a damp cloth only; do not use any
cleaners.
 Make sure the roller belt is disengaged or fold up the roller after
use. Leaving the belt engaged on the drums will cause the belt to
lose its tension over time.
 Make sure all fasteners are tightened onto the roller frame, and
keep all other fasteners snug. Do not overtighten any fasteners
or you will risk damaging the frame.
 PVC ROLLER MODELS: Do NOT expose your roller to
direct sunlight or excessive heat for extended periods as the
drums may warp.

Warranty

SportCrafters warrants your roller and accessories to be free of
any and all defects in material or workmanship. This warranty
does not apply to parts that have been worn out through normal
use, or damaged through misuse, abuse, neglect, accident, or acts
of God. Where applicable, incidental and consequential damages
are not covered, and there are no other warranties, expressed or
implied, This warranty applies to the original owner, and is valid
for 1 year from the date of purchase.
Please retain your receipt as proof of purchase. We can be
reached by using our contact link on
574-243-4994
www.sportcrafters.com or at
ROLLER FORK STAND
The SportCrafters Roller Fork Stand
should be used only with the
SportCrafters aluminum or PVC
folding roller. It's only coincidence
if it fits any other brand or model.
As with all SportCrafters products,
this unit is 100% made by hand in
Granger, Indiana U.S.A.
SportCrafters Inc
51345 Bittersweet Rd
Granger, IN 46530
574 243 4994