Precautions In Sales Promotion; Handling Instructions; Caution Plates; Screw Driving-Depth Adjustment - Hitachi W 6VB2 Technical And Service Manual

7. PRECAUTIONS IN SALES PROMOTION

In the interest of promoting the safest and most efficient use of the Models W 6VB2 and W 8VB electric
screwdrivers by all of our customers, it is very important that at the time of sales the salesperson carefully ensures
that the buyer seriously recognizes the importance of the contents of the Handling Instructions, and fully
understands the meaning of the precautions listed on the Caution Plate attached to each tool.

7-1. Handling Instructions

Although every effort is made in each step of design, manufacture and inspection to provide protection against
safety hazards, the dangers inherent in the use of any electric power tool cannot be completely eliminated.
Accordingly, general precautions and suggestions for the use of electric power tools, and specific precautions and
suggestions for the use of the electric screwdriver are listed in the Handling Instructions to enhance the safe and
efficient use of the tool by the customer. Salespersons must be thoroughly familiar with the contents of the
Handling Instructions to be able to offer appropriate guidance to the customer during sales promotion.

7-2. Caution Plates

The following basic safety precautions are listed on the Name Plate attached to the main body of each tool.
However, these precautions are not listed for European countries.
For Asia and Oceania
CAUTION
For the U.S.A. and Canada
WARNING
AVERTISSEMENT

7-3. Screw Driving-Depth Adjustment

Information and suggestions for screw driving-depth selection for applicable screws are described in the Handling
Instructions. The salesperson must be thoroughly familiar with screw driving-depth adjustment procedures to be
able to instruct the customer/user in performing adjustment so that the screw neither protrudes above nor sinks
excessively below the surface of the workpiece into which the screw is driven.
Read thoroughly HANDLING INSTRUCTIONS before use.
To reduce the risk of injury, user must read and
understand instruction manual
Afin de reduire le risque de blessures, l'utilisateur doit
lire et bien comprendre le mode d'emloi.
--- 6 ---