Download Print this page

Pro-Ject Audio Systems Tuner Box Instructions For Use page 4

Advertisement

Technical specifications Pro-Ject Tuner Box
Tuning range FM-band:
Programmable presets:
Frequency response:
S/N ratio:
THD:
Stereo separation:
Sensitivity:
Antenna input:
Line-level output:
Trigger in and out:
Output voltage:
Outboard power supply:
Power consumption:
Dimensions (W x H x D):
Weight:
Service
Should you encounter a problem which you are not able to alleviate or identify, please contact your dealer for
further advice. Only when the problem cannot be resolved there should the unit be sent to the responsible
distributor in your country.
Warranty
The manufacturer accepts no responsibility for damage caused by not adhering to these instructions
for use. Modification or change to any part of the product by unauthorized persons release the
manufacturer from any liability over and above the lawful rights of the customer.
PRO-JECT is a Registered Trademark of H. Lichtenegger.
This guide was produced by: Audio Trade GmbH
Copyright © 2008. All rights reserved.
4
© Audio Trade GmbH · Pro-Ject Tuner Box · Revision 1.3.08/1.5.08
87,5 - 108,5MHz
(50kHz
8
20Hz - 20kHz/±1dB
50dB
0,05% / ∆f 75kHz and f mod 1kHz
30dB / ∆f 75kHz and f mod 1kHz
9dB µV mono, 19µV stereo /75 ohms
1 x co-axial DIN-socket (75 ohms) / US-model F-socket
1 pair RCA/Phono sockets
2-pole co-axial ∅ 2,5mm jack
0,775Veff
16V/200mA AC, suitable for your country's mains supply
16V/70mA AC
103 x 38 x 141mm
565g without power supply
The information was correct at the time of going to
press. The manufacturer reserves the right to make
changes to the technical specification without prior
notice as deemed necessary to uphold the ongoing
process of technical development.
steps)

Advertisement

loading