Emergency Stop Feature - Real Care Baby II-plus Operating Handbook

Mishandle Screens
JAMES 09/25
Proper Care 90%
Missed Care 8
Mishandle 6
Total: 2d 9h 0m
Facilitators Using a Combination of Realityworks Infant
Simulator Models:
RealCare Student Reports
programming) can still be used to download data from the control unit for
RealCare Baby II-plus, RealCare
®
If you have the Realityworks infrared printer for use with older model
Babies you can print reports from the handheld control unit by selecting
"Print Report" from the Finish menu.
For best results and optimal wireless programming and reporting, use
Control Center software with RealCare
The control unit stores reports for 30 simulations and overwrites the
oldest reports after 30 simulations have been downloaded. RealCare
Student Reports
of simulation reports.

Emergency Stop Feature

This feature can be used to stop Baby if the software or control unit are
not available, or if the student needs to stop Baby in an emergency.
recommend that you tell students this only if they contact you in an emergency.)
Baby to the Control Center software database upon fi rst use.
WP Wrong Position 1
RH Rough Handle
HS Head Support
SB Shaken Baby
More
Software (for reporting only, not
™
and Control Center software store an unlimited number
™
Use a straightened paper clip to gently press
and hold the Emergency Stop button
BABY CHIMES 6 TIMES.
to hold it for as long as 15 seconds.) Baby
becomes inactive.
Note: This button is also used when adding
Mishandle
1
4
0
For
Baby II and original RealCare
®
Baby II-plus.
®
20
Mishandle
HS Fri 3:20PM
HS Fri 8:44PM
RH Sat 6:56AM
HS Sat 2:10PM
WP Sun 1:28AM
Baby.
®
(We
UNTIL
(You may need