Interactive White Board Owner’s Operating Manual Before operating the unit, please read this manual thoroughly, and retain it for future reference. Contents Safety Warning Installation Setting and Connections Menu Operation Troubleshooting Care and Maintenance Display Mode ...
Safety Warning Before operating the unit, please read this manual thoroughly, and retain it for future reference. Placement Do not place the unit on an unstable cart, stand, tripod, bracket, table, or shelf. Do not expose the unit to direct sunlight and other sources of heat. Do not place the unit near appliances that create magnetic fields.
Page 4
Humidity Do not expose machine to rain, damp area or place near water. Ensure the indoor operating humidity is 10~90%, storage humidity is 10~95%. Ventilation Keep all ventilation openings clear. Ensure that the unit has enough space for ventilation around: left, right and back >10cm, top>...
Page 5
Installations Open your package 1) Checking parts: Warranty Card, Quick Use, Remote Control, Power Cord, VGA/USB/Audio/AV/YPBPR cables, Batteries, hand-write-touch-pen and CD ...
2).The mobile bracket (matched) takes material object as the standard 3).The wall bracket (matched) takes material object as the standard 2) Installation 1).Please read “Mobile Bracket Installing Instruction” while installing. 2).Please read “Wall Bracket Installing Instruction” while installing. Control Panel (located at the Front panel) ...
Page 7
YPbPr signal input (DVD, set ‐top ‐box with YPbPr output etc) ○ YPbPr Earphone or to another external Audio equipment ○ AUDIO OUT Composite video and Audio signals (R-L) ○ AV-1 IN Composite Video and Audio signals (R-L) by RCA terminals ○ AV-2 IN ...
Page 9
Remote Control Buttons` Function Description Power supply switch, Turn on and off the AC source 1 POWER Mute ON/OFF. 2 MUTE Picture mode selection 3 P.MODE Sound Mode selection. 4 S.MODE Play/Pause 5 ...
Page 10
2 Remote Control Instruction Insert the Batteries 1 Remove the cover on the rear of the remote control 2 Insert two “AAA” batteries 3 Place the cover Remote control area ...
Page 11
CAUTION RISK OF DAMAGE IF BATTERY IS REPLACED WITH AN INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Connecting and Setting For the safety of you and your unit, please do not connect any power source before the external device is installed ...
Page 12
(1) Connect an AV cable between display and external device through the AV out(). Yellow is Video, Red is Audio-R, White is Audio-L . (2) Plug-in the POWER cord and turn ON the display. (3) Press 1 (one) to turn the power on located on the front of the display.
Page 13
Y-Pb-Pr (1). Connect the Y-Pb-Pr cable between the display and an external device. (2). Plug-in the POWER cord and switch it on from the rear panel. (3). Press 1 (one) to turn the power on. (4). Press INPUT to change source to YPbPr. ...
Page 14
3 Coaxial Connecting (1) Connect a Coaxial cable from display to an external device. (2) Plug-in the POWER cord and switch it on from the rear panel. (3) Press 1 (one) to turn the power on 4 Video-OUT 1) VGA -OUT ...
Page 15
Connections to Internal PC 1 Network cable 2 Microphone Cable 3 USB Device ...
Page 16
RS232 connection After connecting the central control system and unit, you can use some of the function, such as power on/off or adjust the volume etc. Internal PC basic operations: 1. Wait about 30 seconds after installing PC to back of the display, press POWER to turn on the TV and PC together;...
Page 17
Internal PC unit (option) location With the model which included the PC unit inside, the location of PC dock located at behind of the set.
Page 18
OSD Operation 1. Press menu to display the main menu. 2. Use " / " key to navigate through the menu. ...
Page 19
Source Menu ▲ ▼ Select "Source Menu ", use " " to navigate of each feature press "OK" to make the selection. Picture 1. Press "Menu" key access OSD menu, use " / " to select "Picture" menu. ...
Page 20
▲ ▼ 2. Use " " to select "Picture Mode", access by "Enter" key, use " / " to select the picture mode. ▲ ▼ 3. Use " " to select "Color Temperature", access by "Enter" key, use " / " to select. ▲ ▼ 4. Use " " to select "Aspect Ratio 16:9", access by "Enter" key, use " / " to select. ▲ ▼ 5. Use " " to select "Noise Reduction", access by "Enter" key , use " / " to select. ▲...
Page 21
1.Press "Menu" key to access OSD menu, use " / " to select "Time" menu. ▲ ▼ ▲ ▼ 2. Use " " to select "Time", access by "Enter" key ,use " / / " to set the time. ▲ ▼ ▲ ▼ 3. Use " " to select "Clock", access by "Enter" key ,use " / / " to set the clock time. ▲ ▼ ▲ ▼ 4. Use " " to select "Off Time", access by "Enter" key ,use "...
Page 22
▲ ▼ 3.Use " " to select "Restore Factory Default", access by "Enter" key, use " / " to choose necessary operation selection. ▲ ▼ 4. Use " " to select "Transparency", access by "Enter" key, use " / " to choose the selection. ▲ ▼ 5. Use " " to select "OSD Duration", access by "Enter" key, use " / " to choose the selection. Press the "Menu" key to return. USB When USB module inserted, the picture as like as right appears indicating that the module is accepted. Picture : ( play sounds too) ...
Next/previous music REW/FF key : Stop playing and return to the menu. ▲ ▼ Remark: press " / / " to choose the selection, enter by "enter" key. MOVIE ▲ ▼ Use " / " key to select "MOVIE" and "Enter", press " / / " to choose the selection, enter by "enter" key. Press " " key to play. Press "EXIT" key to return the menu. " " key to play or pause. Next/previous movie REW/FF key : Stop playing and return to the menu. ▲ ▼ Remark: Press " / / " to choose your selection, enter by "enter" key. TEXT ▲ ▼ Use "" key o select "TEXT" and "Enter", press " / / " ...
Page 24
correct. 3. Check whether the batteries are exhausted. The unit shuts down 1. Check sleep function if operated. automatically 2. Check whether there is a sudden power failure. 3. Check for the signal to system and control. ...
Poor picture 1 .Adjust chroma, brightness and contrast in the menu. 2. Check the signal cable. Audio not working properly No sound 1. Check the mute function if operated. 2. Adjust sound volume. 3. Check the audio cable. ...
Need help?
Do you have a question about the WB55F1D1 and is the answer not in the manual?
Questions and answers