Satellite Navigation Systems - Triumph Trophy SE Handbook

®
Bluetooth Audio Playback
Note:
• The Bluetooth Audio source will
be displayed if it is enabled, even if
the device is not active.
Select the Bluetooth audio source.
Select the audio track or album etc. to be
played using the device controls; refer to the
device manufacturer's instructions.
Tracks will be played in the order defined by
the device.
If available, artist and track name will be
displayed in the lower instrument display
screen.
Bluetooth Audio Settings
It is possible to turn off the device as an input
source. This will allow a phone to remain
connected and receive incoming calls (see
page 43), but not play back audio to the
motorcycle.
The setting BLUETOOTH AUDIO can be
turned on or off in the ALT SOURCE menu
(see page 40). The setting is off by default.
External Media Players and Telephone

Satellite Navigation Systems

The audio system provides support for
®
Garmin Zumo Satellite Navigation Systems
models 660 and 665.
Other satellite navigation systems may be
compatible.
Audio input from the navigation system is via
a 3.5 mm audio jack located inside the
cockpit, adjacent to the headlight.
The navigation system must be connected to
the audio system power supply to prevent
interference. The power supply is located
next to the 3.5 mm jack inside the cockpit. A
suitable lead is available from your authorised
Triumph dealer.
For full details refer to the instructions
supplied in the navigation mount kit and
power lead kit available from your authorised
Triumph dealer.
Navigation (NAV) System
Announcements
During navigation system announcements
the current radio programme will be
interrupted and external sources such as iPod
or USB will be paused; playback will resume
when the navigation announcement ends.
The instruments will display NAV in the lower
display area during
announcement.
a navigation
39