IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING WARNING • To prevent personal injury or property damage, do not attempt to start engine until all assembly steps are complete and you have read and understand the safety and operating instructions in this manual. •...
Page 5
• Do not vacuum areas that have been recently treated with fertilizers, pesticides or herbicides. Follow chemical manufacturer’s safety instructions regarding contact with treated areas. • Do not vacuum flammable liquids such as gasoline, kerosene, diesel fuel, paint thinner, etc. •...
ASSEMBLY INSTRUCTIONS NOTE: Remove unit from carton. Do not discard any inserts or packing until unit is completely assembled. All mounting hardware is on the unit in its proper location. TO ASSEMBLE HANDLES NOTE: The numbers used in the following steps refer to those used in the parts list and exploded view of the Handle and Bag Assembly on Page 7.
Page 8
SAFETY INTERLOC SYSTEM This equipment incorporates a Bag Safety Interloc System, Figure 1. When bag assembly is removed and lanyard switchfoot is disconnected Briggs & Stratton/Honda engine wiring schmatic. To drain oil, use hand pump.
Page 12
HANDLE & DRIVE ASSEMBLY PARTS LIST Item Part No. Qty. Description Item Part No. Qty. Description 68-60-A Bearing 89-105-D Engine, 5 HP B/S Q 79-104-A Retaining Ring 92-24 Engine, 5 HP B/S Q I/C PTO 50-33-A WSR-Special 91-09 Engine, 5 HP Honda 74-80-A Roll Pawl 82-04-PTD...
Parts not manufactured by Parker Sweeper Company such as engines, batteries, battery chargers, hydraulic pumps, and tires are covered by and subject to the warranties and/or guarantees of their manufacturers. Please contact Minuteman International, Inc. for procedures in warranty claims against these manufacturers.