Advertisement
Saint Power SP2000 Product Manual
SP2000 Electrical Specifications
SP2000 Portable Solar Unit
WARNING: Risk of Death or Electrocution – High Voltage / High Amperage
unit. Do Not Open Cover - Service only by qualified technician. Do not spill
liquids on unit. Use with Cover Open in Dry Area!
OUTPUT POWER : 110V : 12V
110 Volt Circuit – GFCI Protected – Up to 2000 Watts /16 Amps
Connect the 250 Amp Circuit Breaker to activate inverter circuit
Press remote ON power switch to activate inverter
In an emergency the 250A Circuit Breaker can disconnect
power
12 Volt Circuit - Dual Cigarette Lighter – 20 Amp Max Total
Connect the 20 Amp Circuit Breaker to activate 12V circuit
INPUT POWER : SOLAR : AC : DC
Solar Charging – 20 Amp Charge Controller
Connect Solar Panel to Single 12V Cigarette Lighter Adapter
AC Charging – 10 Amp Smart Multistate Charger
Connect AC extension cord to supplied 110V Socket
3 Phase Smart Charger. The Last phase is a float charging
mode.
DC Charging – Up to 20 Amps
Connect Single DC Charging plug to Car Cigarette plug
LCD DISPLAY :
Scroll for Solar Status, Battery Status, 12V Output Information
See manual for more information
Press the ON button to turn ON OUTPUT on the 12 V Cigarette Lighter
Output
Scroll through the Left and Right arrows for
State of Charge
Input charging Amps from the Solar Panel
Load information on the 12 V output circuit.
Page 14
Settings should be 70Ah – Sealed (AGM)
Advertisement
