�ying rails and the tripod �ange. Replace them if necessary. Make sure that during operation on spacer tubes, no persons will stand close to the loudspeakers. Use only accessory parts speci�ed by ProAudio Technology or original accessory parts from ProAudio Technology. Loudspeakers always produce a magnetic �eld. Make sure...
Description: The M20 is a no-compromise 2-way monitor speaker with a built- in passive frequency crossover. Note: It is equipped with two 10“ cone chassis with a water-repellent coating and one 1.4“ high-frequency driver. The directivity Use the M20 monitor speaker characteristic is 80 x 60 degrees (h x v).
Operation mode 1 : M20 Fullrange DELTA 8.4-DSP The four loudspeakers are wired using two 4-pole speaker cables. The connection leads between the loudspeakers must be 4-pole as well. Each ampli�er channel will drive one speaker. Four ampli�er channels will be assigned.
DELTA 14.4-DSP The sixteen loudspeakers are wired using 4-pole speaker cables. Each ampli�er channel will drive four speakers. Four ampli�er channels will be assigned. Operation mode 2 : M20 with Subwoofer 1 / 2 3 / 4 DELTA 8.4-DSP One subwoofer and one monitor are connected per side using 4-pole speaker cables.
It is herewith con� rmed that the mentioned products comply with the protection requirements of the relevant EU directives. If you have any questions, we kindly ask you to get in touch with ProAudio Technology.