Firmware Loading; Using Rolo (Rockbox Loader); Rockbox In Flash; Introduction - Rockbox Archos Recorder V2 User Manual

Chapter 13. Advanced Topics
Hint: Use the Save .cfg File feature (Main Menu
save the current settings, then use a text editor to customize the settings file. See
Appendix section
Save Sound Settings This option writes a .cfg file to your player's disk. The config-
uration file has the .cfg extension and is used to store all of the sound related
settings.
Save Theme Settings This option writes a .cfg file to your player's disk. The config-
uration file has the .cfg extension and is used to store all of the theme related
settings.

13.4. Firmware Loading

When your player powers on, it loads the Archos firmware in ROM, which automatically
checks your player's root directory for a file named ajbrec.ajz. Note that Archos
firmware can only read the first ten characters of each filename in this process, so do not
rename your old firmware files with names like ajbrec.ajz.old and so on, because it is
possible that the player will load a file other than the one you intended.

13.4.1. Using ROLO (Rockbox Loader)

Rockbox is able to load and start another firmware file without rebooting. You just
"play" a file with the extension .ajz.
versions without deleting your current version.

13.5. Rockbox in Flash

13.5.1. Introduction

When you bought your Recorder V2/FM, it came with the Archos firmware in flash
ROM. When you power on your player, this Archos firmware starts, and then loads an
updated firmware from disk if present (ajbrec.ajz). An ordinary Rockbox installation
only replaces the on-disk firmware, leaving the flash ROM contents intact. That means
the Archos firmware still controls the boot process.
The main reason to change this is to improve the startup time of your player. The
Archos bootloader is rather slow. With Rockbox in flash, your player will boot much
faster, typically in three to five seconds. Furthermore you might prefer a clean Rockbox
environment, with as little remnants of the Archos software as possible.
Warning: Flashing your player is somewhat dangerous, like programming a mainboard
BIOS, CD/DVD drive firmware, mobile phone, etc. If the power fails, the chip breaks
while programming or most of all the programming software malfunctions, you'll have a
dead box. We take no responsibility of any kind, you do that at your own risk. However,
we tried as carefully as possible to bulletproof this code. There are a lot of sanity checks.
If any of them fails, it will not program.
The Rockbox manual
D (page 168) for the full reference of available options.
(version 3.13)
Manage Settings) to
This can be used to test new firmware
Archos Recorder V2/FM
144