Audio/Sound - Warpia StreamHD Installation & Troubleshooting Manual

For example, if the external monitor is to the right of the computer
display, select "Extend to right."
3) Drag the window you want to move in the direction that matches the
extension setting.
For example, if the desktop space is extended to the right, drag the
window off of the right edge of the primary display and it will appear on
the extended desktop.
I cannot run a 3D program or a program using DirectDraw commands on the
external monitor connected to the StreamHD™
This product does not support 3D programs.
Running applications that use certain DirectDraw commands (such as
some 2D gaming applications) is also not supported. If you want to play
these games in full-screen mode, disconnect the StreamHD™ and use your
computer's display.

9.1.2 Audio/Sound

There is no sound coming from the external audio device connected to the
StreamHD™.
Check and adjust the volume settings.
Make sure the cable connecting the audio device to the StreamHD's audio
output is secure.
Check that the Mute all/Mute checkboxes in Microsoft® Windows® are not
selected or that the volume is not set too low.
To locate these settings, double-click the speaker icon in your Windows®
System tray/Notification Area.
Close your media player application, if it is running. Wait approximately 10-
15 seconds for the operating system to recognize the audio device conne -
- ted to the StreamHD™ and then restart your media player application.
The audio port on the StreamHD™ may be disabled. To enable the port,
follow the instructions in "Configuring audio
There is no sound coming from the computer's internal speakers, or from the
headphones/headset connected directly to the docked computer.
By default, the internal speakers and audio ports on the computer are disabled
when the computer is connected to the StreamHD. To enable the speakers or
audio ports on the computer,
ports"
follow the instructions in "Configuring audio
25
on page 19.