Configuring Advanced Settings; Setting Up The Dhcp Server - Asus DSL-N16U Series User Manual

Configuring Advanced settings

Setting up the DHCP Server

Your wireless router uses DHCP to assign IP addresses
automatically on your network. You can specify the IP address
range and lease time for the clients on your network.
To configure the DHCP server:
1. Click LAN on the left navigation panel.
. Click the DHCP Server tab.
3. In the Enable the DHCP Server? field, tick Yes.
4. In the IP Pool Starting Address field, key in the starting IP
address.
5. In the IP Pool Ending Address field, key in the ending IP
address.
6. In the Lease Time field, specify in seconds when an assigned
IP address will expire. Once it reaches this time limit, the DHCP
server will then assign a new IP address.
• ASUS recommeds that you use an IP address format of
• An IP Pool Starting Address should not be greater than the IP
e8931_dsl-n16u_manual.indd 35
19.168.1.xxx (where xxx can be any number between  and
54) when specifying an IP address range.
Pool Ending Address.
35
1/9/14 1:01:40 PM