Page 2
Visit ARRMA-RC.com for support, parts and upgrades for your kit 'GO FOR IT' is the worldwide owner's forum for ARRMA. Here you will fi nd other ARRMA owners, get help and advice on how to get the best from your ARRMA product.
Page 3
Safety Instructions for Batteries 1. Use only four(4) AA alkaline batteries in your ATX200/ATX300 transmitter. Caution: 2. Do not dispose of the battery in a fire as it may explode. Check with local codes for possible special disposal instructions.
Page 4
To reduce the steering dual-rate fi rst check that the transmitter and receiver are switched on then turn the adjuster, at the front of the ARRMA ATX transmitter, to the left. It has 10 levels of adjustment and will beep each time an adjustment is made; a long beep signifi es you have reached the end of the adjustment.
Failsafe Setup The failsafe will return the servos/throttle to a certain position if contact is lost with the ATX300. To set the failsafe, check the transmitter and receiver are switched on then press and hold the third channel button for 2 seconds. The status LED on the transmitter will blink.