Skywatch GPS/GSM ALARM & TRACKING SYSTEM User Manual page 4

SMS Control Instructions:
The format of the instruction is: "user password (111111) + control code
(XXX)".
The default user password is 111111. XXX is the control code; control
code could be capital letters or small letters. There is no space between the
user password & the control code instruction.
Lock Doors & Arm System
Command: 111111ARM
This instruction is to arm the system and lock the vehicle's doors. The
signal lights on the vehicle will flash once and the siren will sound once.
SMS Response: Arm Settled! vehicle position: ......
Unlock Doors & Disarm System
Command: 111111DSM
This instruction is to disarm the system and unlock the vehicle's doors.
The signal lights on the vehicle will flash twice and the siren will sound
twice.
SMS Response: Disarm! vehicle position: ......
Check System Status
Command: 111111CHK
This instruction is to inquire the system status and the location of the
vehicle.
If system is arm
SMS Response: Arm! vehicle position: ......
If system is disarm
SMS Response: Disarm! vehicle position: ......
3
Select "I accept" and click on the next button.
Select the last two options and click on the finish button.
Google Earth is now downloaded and ready to be use. Anytime you want
to use it just click on the "Lunch Google Earth" Icon.
12