Getting Started - O2 Boostbox Getting Started

Getting started

Boostbox
Step 1: Plug one end of the white cable into your
Boostbox and the other into any Ethernet socket on your
broadband router.
Broadband
router
Step 2: Plug your Boostbox into the mains and press the on
button. The light will turn on.
Step 3: Your Boostbox will now automatically set up.
This usually takes a few minutes but might take up to
four hours. During setup, the light will flash.
Mains
Step 4: Your Boostbox will be ready to use when the lights
are all on. The light will be active when you use your Boostbox.