Supplies you will need to give your HUMALOG injection:
HUMALOG KwikPen
HUMALOG KwikPen compatible needle (Becton, Dickinson and Company Pen
Needles recommended)
Alcohol swab
Preparing HUMALOG KwikPen:
Wash your hands with soap and water.
Check the HUMALOG KwikPen Label to make sure you are taking the right type
of insulin. This is especially important if you use more than 1 type of insulin.
Do not use HUMALOG past the expiration date printed on the Label.
Always use a new needle for each injection to help ensure sterility and prevent
blocked needles.
Step 1:
Pull the Pen Cap straight off.
Wipe the Rubber Seal with an alcohol
swab.
Do not twist the cap.
Do not remove the KwikPen Label.
HUMALOG should look clear and
colorless. Do not use HUMALOG if it is
thick, cloudy, colored, has solid particles
or clumps in it.
Step 2:
Pull off the Paper Tab from Outer Needle
Shield.
2
Need help?
Do you have a question about the KwikPen and is the answer not in the manual?