Do you have a question about the BCR and is the answer not in the manual?
Questions and answers
Summary of Contents for Adel BCR
Page 1
READER ___________________ USER MANUAL PRODUCED BY ADEL S.r.l. Legal address: Via Saffi N. 58 Operative address Via Nonantolana N. 970/1 41100 MODENA Tel 059-2550137 Fax 059-2551207 e-mail adel@adel2000.it Rif. BCR TECHM 1_3.ENG.PDF TECHNICAL DATA ARE SUBJECT TO CHANGE WITHOUT ADVISE...
Page 2
ADEL S.r.l. – BCR Barcode / Contactless reader - User Manual Rev. 1.3 REVISIONS DATE AUTHOR VER. CHANGES 12/03/2005 First edition 27/11/2006 Modified paragraph 3.1.4 01/07/2008 Modified paragraphs 5.2 and 5.3 18/09/2008 Modified paragraphs 3.1.4 and 3.1.5 pag. 2...
ADEL S.r.l. – BCR Barcode / Contactless reader - User Manual Rev. 1.3 INDICE GENERALITIES ..............................4 ELECTRIC AND MECHANICAL SPECIFICATIONS ..................4 DIMENSIONS AND WEIGHT; BASE AND COMBO VERSIONS ............4 ELECTRIC POWER SUPPLY ........................4 INTERFACE ..............................4 AVERAGE LIFE .............................
Optionally and in alternative the version with contactless card and ticket reader is available. The BCR COMBO version, ideal for automatic cashers and payment operations allows to install both the barcode reader and the contactless card reader. In this way you can realize parking systems with barcode tickets for occasional parkers and contactless card for season parkers or pre-paid cards for habitual users.
3.1.6 R/W CONTACTLESS UNIT For reading and writing of MIFARE contactless cards in the BCR reader a module in accordance with following standards is employed: ISO 14443-A and ISO 15693. On request the ISO 14443-B standard is available. This module is installed between the two flanks at a distance that allows communication with the card.
Pin 10 NC 5.1.3 I/O SIGNAL CONNECTORS It is possible to connect to the BCR module three input digital signals and three output signals open collector type. The I/O connector 1 (JST PHD 6x2 PM 90°) pinout is the following:...
OUT 3 Pin 4 OUT 4 5.1.7 SCANNER CONNECTOR The laser scanner is connected to the CPU board by the means of the connector BCR (JST PH 4x1 PM 90°) with the following pinout: Pin 1 Pin 2 Pin 3...
ADEL S.r.l. – BCR Barcode / Contactless reader - User Manual Rev. 1.3 Description Function Pin N° ID CPR.M02 –B/-BA RS232 TTL –Transmit data RS232 TTL –Receive Data +5V DC 5.1.9 PROGRAMMING CONNECTOR The firmware download occurs by the means of the connector FLASHPRG (JST PH 4x1 PM 90°)
ADEL S.r.l. – BCR Barcode / Contactless reader - User Manual Rev. 1.3 1 FLASH Command in execution 2 FLASHES Command not executed for title not present in the module 3 FLASHES Command not executed for title already present in the module...
ADEL S.r.l. – BCR Barcode / Contactless reader - User Manual Rev. 1.3 7. BCR CPU LAYOUT 8. ADJUSTMENTS AND SETTINGS 8.1 BARCODE AND CONTACTLESS READER SETTING The barcode reader is regulated in the position that guaranties best reading performances of barcodes.
ADEL S.r.l. – BCR Barcode / Contactless reader - User Manual Rev. 1.3 10. CONNTACTLESS TICKET AND CARD FORMAT The contactless card in paper or in plastic format is ISO. The paper ticket with barcode can be in fan fold or cut directly from roll and with following dimensions: 54x85,6 mm.
Need help?
Do you have a question about the BCR and is the answer not in the manual?
Questions and answers