Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Multimac 1320
- Page 1 T h e f o u r - s e a t e r c h i l d s e a t Fitting Instructions and Manual...
-
Page 2: Table Of Contents
4. Removing the Multimac Page 8 5. Tether Straps Page 9 6. Fitting the Headrests Page 10 7. Securing Children in Multimac Page 11 8. Minimac Baby Cradle Page 12 9. Cleaning and Maintenance Page 15 10. Inspection After Any Crash Page 16 11. -
Page 3: Introduction
The MINIMAC is a bespoke rear-facing seat, with carry handles, 2.3 CHILD SAFETY which simply slots and “locks” into position when one of the main seat cushions is removed. You have bought a MULTIMAC to give your child the best safety and The Minimac comfort you can. COLOURS To maintain this safety, please note the following general rules: •... -
Page 4: Fitting The Multimac
The handle of each ratchet adjuster should be rotated forwards (you will With a little practice, the MULTIMAC can be fitted or removed from your car in one or have to pull the locking bar again), and two minutes as shown in the photographs:... -
Page 5: Tether Straps
Appendix, or alternatively call MULTIMAC. The MULTIMAC upholstery is soft and the back and base of the seat are covered in smooth ABS plastic to protect your car-seat. -
Page 6: Fitting The Headrests
In this case, the tether straps should be slackened so that the MULTIMAC can be pulled forward a little to give enough clearance for the headrests in the fully retracted position, • R emove the ADJUSTAMAC links by enabling them to be fitted/removed. -
Page 7: Minimac Baby Cradle
“Comfort Class” – 300mm wide is not wide enough for the MINIMAC time basis we recommend that the crotch strap be taped in this The MULTIMAC is made of a variety of widths to fit a wide range of vehicles. position to prevent having to manually position it every time. -
Page 8: Cleaning And Maintenance
MULTIMAC 8.3 SEATING THE BABY IN THE MINIMAC The MULTIMAC is upholstered in “regular” car fabrics, and can be cleaned either with warm soapy water, or any proprietry upholstery cleaner, taking care to read the The MINIMAC is fitted with a 3-point... - Page 9 MULTIMAC will fit each car. Generally, it will not fit into the 2-door or 3-door versions of In a very extreme crash, therefore, the main aluminium structure will bend slightly and In a very extreme crash, therefore, the main aluminium structure will bend slightly and each model: only the 4 or 5-door.
- Page 10 Manufacturer Model Multimac Eyebolt Webbing Buckles Model Mercedes E Class W124 86-95 7/16"x35mm — E Class W210 96-03 7/16"x35mm — Peugeot 207 5dr M12x35 Standard 250mm 307 5dr 01-07 M12x35 Standard 250mm 308 5dr M12x35 Standard 250mm 407 40 M12x35...
Need help?
Do you have a question about the 1320 and is the answer not in the manual?
Questions and answers