Advertisement
O P E R A T I O N M A N U A L
3. Check open circuit voltage at DC disconnect
switch to ensure it is within proper limits
according to the manufacturer's installation
manual.
4. If installation contains additional DC
disconnect switches repeat the step 4
voltage check on each switch working from
the PV array to the Lifeway sun power
generator DC disconnect switch closing each
switch after the test is made
5. At the point consult the Lifeway Sun power
generator manual and follow proper startup
procedure.
7. Confirm that the operating voltage is within
proper limits according to the manufacturer's
installation manual.
8. After recording the operating voltage at the
Lifeway Sun power Generator close any
open boxes related to the system.
9. Confirm that theLifeway Sun power
Generator is producing the expected power
output on the supplied meter.
10. Provide the house owner with the initial
startup test report.
10
Advertisement
