Page 1
Operating Instructions XB WiFi S O F T B O X E S ㆍ F L A S H E S ㆍ A C C E S S O R I E S www.rimelite.com...
Page 2
Operation Instruction 1. XB WIFI System XB PRIME iPhone WIFI Converter iPad Wireless Router...
Page 3
2. WiFi Converter ① ② ③ ④ ① Antena ② UTP Cable Socket ③ Adapter Socket ④ Adapter Socket...
Page 4
1. Connecting UTP LAN port. Connect Wi-Fi converter to Wireless router with UTP LAN cable. (Reference image B1,B2) * If the Wireless router is connected to the Internet, UTP LAN cable has to be connected to LAN 1~4 Port. ** Connect UTP LAN Cable to Internet main port if the Internet use is nothing the area. Wi-Fi Convter 2.
Page 5
3. Check Network SSID (Sub System IDentification) For the check of Wi-Fi’s normal operation. Complete the sequence instruction(No: 1,2), and check the SSID network with Apple device(i-Phone, i-Pad, i-Podtouch)can be operated normally. change Wi-Fi configuration of Apple device ( iPhone, iPad, iPod touch) ‘DHCP’ to ‘STATIC’. * IP Address is 192.168.11.xx.
Page 6
4. Application download from Apple store) Enter ‘XB PRIME, RIME LITE, XB WIFI’ on the research window of Apple store. Download ‘XB WIFI’ application to the device. iPhone Appstore iPad Appstore...
Page 7
5. “XB WIFI” Flash Scan (iPhone) Scan flashes are connected to iPhone. Run ‘’xb wifi’, and touch Option button(A2). Scan(A3) Studio which were connected flashes. * Group Setting each xb-prime (A,B,C,D,E). In ‘xb wifi’ option(i-Phone), select a studio(A,B,C,D,E) of which XB-prime flashes belong to...
Page 8
6. XB WIFI (iPhone) Prop(On) : concurrent control of the Flash and Modeling light Prop(Off) : Individual control of the Flash and Modeling light Controlling each flash at once(Indivisual) Group Setting (A, B, C, D, E) Controlling each flash separately (Master)
Page 9
6. XB WIFI (iPhone) * Controlling each flash at once(Indivisual) * Touch i-Phone display left edge, the display mode change Flash Mode to Modeling Mode. * Touch i-Phone display right edge, the display mode change Modeling Mode to Flash Mode.
Page 10
6. XB WIFI (iPad) Flash Output ( + : Up, - : Down ) Group Setting (A, B, C, D, E) Status of Modeling lamp Modeling lamp Output ( + : Up, - : Down ) Controlling each flash separately (Master)