Summary of Contents for Qvidium Pro-MPEG DVB-ASI Gateway
-
Page 1: Quick Start Guide
Q V i d i u m ™ T E C H N O L O G I E S , I N C . Pro-MPEG DVB-ASI Gateway Quick Start Guide © 2006 QVidium™ Technologies, Inc. 12989 Chaparral Ridge Road, San Diego, CA 92130 Phone 858.792.6407 • Fax 858.792.9131... -
Page 2: Table Of Contents
Table of Contents Introduction......................3 Unpacking......................3 System View.....................4 Front View.........................4 Rear View .........................5 Configuring the System ..................6 Using the LCD Front Panel Console.............6 Setting the Media Network IP Address ............7 Ethernet Port Configuration................9 Setting the Netmasks and Gateway Address..........10 Transmitting a Stream..................11 Creating a network transmit stream............11 Starting a network transmit stream .............12 Stopping a network transmit stream ............12... -
Page 3: Introduction
Pro-MPEG DVB-ASI Gateway QVidium™ Technologies, Inc. Introduction Congratulations on purchasing the QVidium™ Pro-MPEG DVB-ASI gateway. This chapter introduces the features and functions of the product. 1.1 Unpacking After unpacking the shipping carton, you should find these items: QVidium™ Pro-MPEG FEC DVB-ASI Gateway... -
Page 4: System View
Indicates activity on the flash disk drive. 6 USB Ports Either of the ports connects to a USB keyboard. 7 LCD Screen Displays messages and values entered. 8 Control Buttons Allow you to enter network configuration information. Quick Start Guide 4/18 © 2006 QVidium™ Technologies, Inc. -
Page 5: Rear View
1 Ref Clock Reference for ASI transmit 2 ASI Tx ASI transmit of network receive stream. 3 ASI Loop-through ASI transmit of ASI receive stream. 4 ASI Rx ASI receive to network transmit. Quick Start Guide 5/18 © 2006 QVidium™ Technologies, Inc. -
Page 6: Configuring The System
The C (Cancel) button cancels the data entered or the option displayed. In status mode, it changes the mode to control/configuration mode. Quick Start Guide 6/18 © 2006 QVidium™ Technologies, Inc. -
Page 7: Setting The Media Network Ip Address
The Media IP Address corresponds to the LAN1 (Eth0) network interface. Follow the procedure below to set this IP address. NOTE: Both Ethernet ports (media and management) on the QVidium™ Pro-MPEG DVB-ASI Gateway have identical functionality. Either Ethernet interface can be used for media, management, or both types of traffic. - Page 8 8. Press the (Select) button to save the change or use the (Cancel) button to not change the address. 9. Press the (Cancel) button 2 times to get back to the top level. Quick Start Guide 8/18 © 2006 QVidium™ Technologies, Inc.
-
Page 9: Ethernet Port Configuration
(Select) button to save the change, or use the (Cancel) button to discard your changes and keep the previous setting. 7. Press the (Cancel) button 2 times to get back to the top level. Quick Start Guide 9/18 © 2006 QVidium™ Technologies, Inc. -
Page 10: Setting The Netmasks And Gateway Address
You can also change the media and management interface’s IP address. IMPORTANT: If you change the IP address of the interface that the web browser is using, you will need to connect again to the system with the new IP address. Quick Start Guide 10/18 © 2006 QVidium™ Technologies, Inc. -
Page 11: Transmitting A Stream
5. Enter the name of the stream. 6. Press the Save button create the stream or press the Streams menu option on the left to return to the streams main area. Quick Start Guide 11/18 © 2006 QVidium™ Technologies, Inc. -
Page 12: Starting A Network Transmit Stream
2. Select the Stop menu option underneath the TX Stream menu. You should see the following message at the top of the web page main area. Stopping network transmit stream... Network transmit stopped. ASI no longer receiving stream. Quick Start Guide 12/18 © 2006 QVidium™ Technologies, Inc. -
Page 13: Receiving A Stream
5. Enter the name of the stream. 6. Press the Save button to create the stream or press the Streams menu option on the left to return to the streams main area. Quick Start Guide 13/18 © 2006 QVidium™ Technologies, Inc. -
Page 14: Starting A Network Receive Stream
2. Select the Stop menu option underneath the RX Stream menu. You should see the following message at the top of the web page main area. Stopping ASI transmit... ASI transmit stopped. Network no longer receiving stream. Quick Start Guide 14/18 © 2006 QVidium™ Technologies, Inc. -
Page 15: Troubleshooting
Pro-MPEG DVB-ASI Gateway QVidium™ Technologies, Inc. Troubleshooting For troubleshooting information, the latest software and to contact us, call or e-mail us at: Phone: (858) 792-6407 E-mail: support@QVidium.com Quick Start Guide 15/18 © 2006 QVidium™ Technologies, Inc. -
Page 16: Appendix
| Yes Setup > LAN1 IP Addr LAN2 IP Addr LAN1 Phy Auto | 100FD | 100HD | 10FD | 10HD LAN2 Phy Auto | 100FD | 100HD | 10FD | 10HD Quick Start Guide 16/18 © 2006 QVidium™ Technologies, Inc. -
Page 17: Front Panel Status Screens
After a brief period, the status screen rotation will revert to the standard order as shown above, but with the optional network status and/or ping status screens now enabled as appropriate. Quick Start Guide 17/18 © 2006 QVidium™ Technologies, Inc. -
Page 18: Electromagnetic Emissions And Safety Certifications
Canadian Department of Communications Radio Interference Regulations. CE – Notice for Europe (CE Mark) This product is in conformity with the Council Directive 89/336/EEC, 92/31/EEC (EMC). UL – Underwriter Laboratories Approval for the USA Quick Start Guide 18/18 © 2006 QVidium™ Technologies, Inc.