All works must be carried out in required. For noise levels guidance accordance with manufacturer’s refer to technical literature, or contact installation and operating procedures. Qualitair, their distributors advice. b) Good working practices must followed at all times so that Mechanical and Electrical Hazards are kept to a minimum.
S Atkins Therefore it is important that the unit is level in all directions to prevent leaks. D Mortimer Qualitair The replacement chassis unit will be fitted with the following electrical connections to which suitable matching connections will have to be provided.
This will MAINTENANCE control your unit maintain temperature setting. Always allow the room conditions to stabilise before resetting the IMPORTANT controls. Before commencing any maintenance work, isolate the unit at mains supply. :E\Manuals\Others\Qualitair\QPM\LG3298L/22QPMChassisUnit...
Page 5
PM CHASSIS UNIT MANUAL :E\Manuals\Others\Qualitair\QPM\LG3298L/22QPMChassisUnit...
Page 6
If unit is fitted with auxiliary supply, NO Cleaning can be carried out by gently cooling functions are available during vacuuming both faces. operation on this supply. Condensate Drain Check condensate drain from evaporator fan assembly is clean and unblocked. Electrical Chassis Component Layout :E\Manuals\Others\Qualitair\QPM\LG3298L/22QPMChassisUnit...
Need help?
Do you have a question about the Qualitair and is the answer not in the manual?
Questions and answers