Buddy to the on position. Now turn the unit around and press and release the power key (top right hand side key). The first time you switch on your Buddy it may take up to 15 seconds to start up.
After the Intempo Digital splash screen the next page to be displayed is the calibration screen. At this point you will need to remove the Styli pen from the Buddy case, once removed carefully press and briefly hold the pen on the center of the target.
Page 6
• Place your Buddy in the Buddy holder • Click the Buddy onto the end of the windshield dock • Use the windshield dock to position your Buddy in your car. • Make sure your windshield is clean and dry before trying to attach the dock.
Page 7
Connecting buddy to your computer (optional) You can connect Buddy to your computer. You can contact your buddy to your computer using the USB cable (driver provided on CD-ROM), in order to update maps etc via Destinator. CD ROM The CD ROM contains the following items:- •...
• Do not expose the Buddy to water. Contact with water can cause this unit to malfunction. • Do not leave your Buddy on view when you leave your vehicle. Unclip your Buddy from the holder and take it with you, it maybe also a good idea to remove the windsheild dock from the windscreen and place it out of sight.
Page 10
Other names and trademarks fall under the proprietary rights of the respective owner. FCC tested and certified. Patents pending. Map data: 1984-2006 NAVTEQ. All rights reserved. Intempo Digital, City Wharf, New Bailey St., Manchester. M3 5ER. UKtel: 0161 828 5219 email: support@intempodigital.com...
Need help?
Do you have a question about the BUDDY and is the answer not in the manual?
Questions and answers